Fardriver ND108850 vs MakerX Go-FOC SV6
Verdict
The Fardriver ND108850 handles 420 A continuous versus 40 A. The MakerX Go-FOC SV6 is lighter at 148 g versus 3500 g.
Specification Comparison
| Spec | Fardriver ND108850 | MakerX Go-FOC SV6 |
|---|---|---|
| Power & Performance | ||
| Min Voltage | 84 V+76V | 8 V |
| Max Voltage | 108 V+48V | 60 V |
| Continuous Amps | 420 A+380A | 40 A |
| Peak Amps | -- | 80 A |
| Physical | ||
| Weight (g) | 3500 g | 148 g-3352g |
| Length (mm) | 222.0 mm | 60.0 mm-162mm |
| Width (mm) | 142.0 mm | 40.0 mm-102mm |
| Height (mm) | 71.0 mm | 23.0 mm-48mm |
| Features | ||
| VESC-Based | No | Yes |
| Regen Support | Yes | Yes |
| Drive Mode | foc | foc |
| Sensor Mode | dual_mode | dual_mode |
| Field Weakening | Yes | -- |
| Self-Learning | Yes | -- |
| Dual Motor | No | No |
| Controller Pairing | No | No |
| Programmable via Display | No | -- |
| Programmable via Phone | yes | -- |
| Programmable via PC | yes | yes |
| Requires Display | No | No |
| Display Support | Yes | No |
| Display Protocols | SIAECOSYS_LIN | VESC |
| Throttle Support | Yes | Yes |
| PAS Support | No | No |
| Requires Pre-Charge | No | -- |
| Requires Power Switch | No | -- |
| Power Switch Support | Yes | No |
| Other | ||
| Max Phase Amps | 850 A+730A | 120 A |
| Cooling | air | air |
| Pricing | ||
| Sellers in Stock | 0 | 0 |