Fardriver ND841200 vs MakerX Go-FOC M100
Verdict
The Fardriver ND841200 handles 600 A continuous versus 30 A. The MakerX Go-FOC M100 is lighter at 104 g versus 3800 g.
Specification Comparison
| Spec | Fardriver ND841200 | MakerX Go-FOC M100 |
|---|---|---|
| Power & Performance | ||
| Min Voltage | 60 V+48V | 12 V |
| Max Voltage | 84 V+9V | 75 V |
| Continuous Amps | 600 A+570A | 30 A |
| Peak Amps | -- | 80 A |
| Physical | ||
| Weight (g) | 3800 g | 104 g-3696g |
| Length (mm) | 238.0 mm | 52.0 mm-186mm |
| Width (mm) | 155.0 mm | 52.0 mm-103mm |
| Height (mm) | 88.0 mm | 13.0 mm-75mm |
| Features | ||
| VESC-Based | No | Yes |
| Regen Support | Yes | Yes |
| Drive Mode | foc | foc |
| Sensor Mode | dual_mode | dual_mode |
| Field Weakening | Yes | -- |
| Self-Learning | Yes | -- |
| Dual Motor | No | No |
| Controller Pairing | No | No |
| Programmable via Display | No | -- |
| Programmable via Phone | yes | -- |
| Programmable via PC | yes | yes |
| Requires Display | No | No |
| Display Support | Yes | No |
| Display Protocols | SIAECOSYS_LIN | VESC |
| Throttle Support | Yes | Yes |
| PAS Support | No | No |
| Requires Pre-Charge | No | -- |
| Requires Power Switch | No | -- |
| Power Switch Support | Yes | No |
| Other | ||
| Max Phase Amps | 1200 A+1080A | 120 A |
| Cooling | air | air |
| Pricing | ||
| Lowest Price | $623.70 | -- |
| Sellers in Stock | 2 | 0 |