KT 45A Sine Wave WP vs MakerX Go-FOC M100
Verdict
The MakerX Go-FOC M100 handles 30 A continuous versus 22 A. The MakerX Go-FOC M100 is lighter at 104 g versus 879 g.
Specification Comparison
| Spec | KT 45A Sine Wave WP | MakerX Go-FOC M100 |
|---|---|---|
| Power & Performance | ||
| Min Voltage | 36 V+24V | 12 V |
| Max Voltage | 52 V | 75 V+23V |
| Continuous Amps | 22 A | 30 A+8A |
| Peak Amps | 45 A | 80 A+35A |
| Physical | ||
| Weight (g) | 879 g | 104 g-775g |
| Length (mm) | 234.0 mm | 52.0 mm-182mm |
| Width (mm) | 80.0 mm | 52.0 mm-28mm |
| Height (mm) | 40.0 mm | 13.0 mm-27mm |
| Features | ||
| VESC-Based | No | Yes |
| Regen Support | Yes | Yes |
| Drive Mode | sinewave | foc |
| Sensor Mode | dual_mode | dual_mode |
| Field Weakening | No | -- |
| Self-Learning | No | -- |
| Dual Motor | No | No |
| Controller Pairing | No | No |
| Programmable via Display | Yes | -- |
| Programmable via Phone | no | -- |
| Programmable via PC | no | yes |
| Requires Display | No | No |
| Display Support | Yes | No |
| Display Protocols | KT | VESC |
| Throttle Support | Yes | Yes |
| PAS Support | Yes | No |
| Requires Pre-Charge | No | -- |
| Requires Power Switch | No | -- |
| Power Switch Support | No | No |
| Other | ||
| Max Phase Amps | -- | 120 A |
| Cooling | air | air |
| Pricing | ||
| Sellers in Stock | 0 | 0 |