MakerX Go-FOC M100 vs MakerX Go-FOC SV6
Verdict
The MakerX Go-FOC SV6 handles 40 A continuous versus 30 A. The MakerX Go-FOC M100 is lighter at 104 g versus 148 g.
Specification Comparison
| Spec | MakerX Go-FOC M100 | MakerX Go-FOC SV6 |
|---|---|---|
| Power & Performance | ||
| Min Voltage | 12 V+4V | 8 V |
| Max Voltage | 75 V+15V | 60 V |
| Continuous Amps | 30 A | 40 A+10A |
| Peak Amps | 80 A | 80 A |
| Physical | ||
| Weight (g) | 104 g-44g | 148 g |
| Length (mm) | 52.0 mm-8mm | 60.0 mm |
| Width (mm) | 52.0 mm | 40.0 mm-12mm |
| Height (mm) | 13.0 mm-10mm | 23.0 mm |
| Features | ||
| VESC-Based | Yes | Yes |
| Regen Support | Yes | Yes |
| Drive Mode | foc | foc |
| Sensor Mode | dual_mode | dual_mode |
| Dual Motor | No | No |
| Controller Pairing | No | No |
| Programmable via PC | yes | yes |
| Requires Display | No | No |
| Display Support | No | No |
| Display Protocols | VESC | VESC |
| Throttle Support | Yes | Yes |
| PAS Support | No | No |
| Power Switch Support | No | No |
| Other | ||
| Max Phase Amps | 120 A | 120 A |
| Cooling | air | air |
| Pricing | ||
| Sellers in Stock | 0 | 0 |