Skip to main content

Search

Search components and kits across the catalog

VOTOL EM200-2sp (Enlarged Heat Sink, LIN/CAN)

Components Compatible with VOTOL EM200-2sp (Enlarged Heat Sink, LIN/CAN)

Controller72V200ASinewave

VOTOL EM200-2sp sine wave controller with enlarged heat sink — 2025 refresh of the EM200-2sp with improved thermal management for sustained high-power operation. 72V nominal, 200A continuous DC / 250A boost DC / 600A peak phase current. Max power 18000W, 200% flux weakening, ≥92% max efficiency, IP67 waterproof, 2.44kg. Supports FOC sinewave drive, dual-protocol (LIN and CAN BUS selectable via software). Hall sensored with regenerative braking. Programmable via PC with USB adapter cable. Designed for 4-8kW PMSM/BLDC motors. Shares the AMP single-connector architecture and function harness with EM150-2 and EM260. Default motor pairing: QS 138 4000W IPM.

26 components are compatible with the VOTOL EM200-2sp (Enlarged Heat Sink, LIN/CAN), including 19 batteries, 4 hub motors, 3 displays.

19 Batteries4 Hub Motors3 Displays
AMORGE 13S5P 20Ah 130A (EVE 40P)

AMORGE 13S5P 20Ah 130A (EVE 40P)

48V·20Ah·130A

From $238.00Variants

VOTOL EM200-2sp (Enlarged Heat Sink, LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 48V, inrush current is significant.

AMORGE 20S4P 16Ah 120A (EVE 40P)

AMORGE 20S4P 16Ah 120A (EVE 40P)

72V·16Ah·120A

From $292.00Variants

VOTOL EM200-2sp (Enlarged Heat Sink, LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S5P 20Ah 150A (EVE 40P)

AMORGE 20S5P 20Ah 150A (EVE 40P)

72V·20Ah·150A

From $372.00Variants

VOTOL EM200-2sp (Enlarged Heat Sink, LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S5P 20Ah 150A (EVE 40P) for Tuttio Soleil01

AMORGE 20S5P 20Ah 150A (EVE 40P) for Tuttio Soleil01

72V·20Ah·150A

From $372.00Variants

VOTOL EM200-2sp (Enlarged Heat Sink, LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 14S7P 28Ah 210A (EVE 40P)

AMORGE 14S7P 28Ah 210A (EVE 40P)

52V·28Ah·210A

From $387.00Variants

VOTOL EM200-2sp (Enlarged Heat Sink, LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 52V, inrush current is significant.

AMORGE 20S7P 28Ah 210A (EVE 40P)

AMORGE 20S7P 28Ah 210A (EVE 40P)

72V·28Ah·210A

From $493.00Variants

VOTOL EM200-2sp (Enlarged Heat Sink, LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S7P 28Ah 210A (EVE 40P) for Tuttio Soleil01

AMORGE 20S7P 28Ah 210A (EVE 40P) for Tuttio Soleil01

72V·28Ah·210A

From $493.00Variants

VOTOL EM200-2sp (Enlarged Heat Sink, LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S8P 32Ah 200A (EVE 40P) for MX500/SX500/MX650

AMORGE 20S8P 32Ah 200A (EVE 40P) for MX500/SX500/MX650

72V·32Ah·200A

From $553.00Variants

VOTOL EM200-2sp (Enlarged Heat Sink, LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S8P 32Ah 220A (EVE 40P)

AMORGE 20S8P 32Ah 220A (EVE 40P)

72V·32Ah·220A

From $553.00Variants

VOTOL EM200-2sp (Enlarged Heat Sink, LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S8P 32Ah 240A (EVE 40P) for Sur-Ron

AMORGE 20S8P 32Ah 240A (EVE 40P) for Sur-Ron

72V·32Ah·240A

From $600.00Variants

VOTOL EM200-2sp (Enlarged Heat Sink, LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S8P 32Ah 240A (EVE 40P) for Sur-Ron

AMORGE 20S8P 32Ah 240A (EVE 40P) for Sur-Ron

72V·32Ah·240A

From $600.00Variants

VOTOL EM200-2sp (Enlarged Heat Sink, LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S9P 36Ah 270A (EVE 40P)

AMORGE 20S9P 36Ah 270A (EVE 40P)

72V·36Ah·270A

From $624.00Variants

VOTOL EM200-2sp (Enlarged Heat Sink, LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S9P 45Ah 220A (Samsung 50S)

AMORGE 20S9P 45Ah 220A (Samsung 50S)

72V·45Ah·220A

From $626.00Variants

VOTOL EM200-2sp (Enlarged Heat Sink, LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S9P 36Ah 270A (EVE 40P) for ONYX RCR

AMORGE 20S9P 36Ah 270A (EVE 40P) for ONYX RCR

72V·36Ah·270A

From $626.00Variants

VOTOL EM200-2sp (Enlarged Heat Sink, LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S9P 36Ah 220A (EVE 40P) for Sur-Ron

AMORGE 20S9P 36Ah 220A (EVE 40P) for Sur-Ron

72V·36Ah·220A

From $653.00Variants

VOTOL EM200-2sp (Enlarged Heat Sink, LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S10P 40Ah 300A (EVE 40P) for Sur-Ron

AMORGE 20S10P 40Ah 300A (EVE 40P) for Sur-Ron

72V·40Ah·300A

From $687.00Variants

VOTOL EM200-2sp (Enlarged Heat Sink, LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S12P 48Ah 360A (EVE 40P)

AMORGE 20S12P 48Ah 360A (EVE 40P)

72V·48Ah·360A

From $817.00Variants

VOTOL EM200-2sp (Enlarged Heat Sink, LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S12P 48Ah 360A (EVE 40P) for RSF650

AMORGE 20S12P 48Ah 360A (EVE 40P) for RSF650

72V·48Ah·360A

From $823.00Variants

VOTOL EM200-2sp (Enlarged Heat Sink, LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S15P 60Ah 420A (EVE 40P)

AMORGE 20S15P 60Ah 420A (EVE 40P)

72V·60Ah·420A

From $938.00Variants

VOTOL EM200-2sp (Enlarged Heat Sink, LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

Frequently Asked Questions

Ready to build?

Start a new build with the VOTOL EM200-2sp (Enlarged Heat Sink, LIN/CAN) and pick from 26 compatible components.

We use cookies for analytics. Privacy Policy