Skip to main content

Search

Search components and kits across the catalog

VOTOL EM260 SGTP 72V (LIN/CAN)

Components Compatible with VOTOL EM260 SGTP 72V (LIN/CAN)

Controller84V250ASinewave

VOTOL EM260 SGTP 72V is a high-power 72V FOC sinewave controller with 250A rated battery current and 600A peak phase current, suited for 4-10kW PMSM/BLDC motors (QS138 / QS205-class hub and mid-drive motors). Top speed ~160 kph on matched builds. Features flux weakening, IP67 waterproofing, CAN BUS communication, and programmable parameters via PC. Uses the VOTOL "New Version" connector architecture: a single TE Ampseal 23-pin signal connector carries all signals except battery and phase wires, which use dedicated screw terminals. Dual-protocol: supports both SIAECOSYS LIN and CAN displays.

24 components are compatible with the VOTOL EM260 SGTP 72V (LIN/CAN), including 18 batteries, 3 displays, 3 hub motors.

18 Batteries3 Displays3 Hub Motors
AMORGE 20S4P 16Ah 120A (EVE 40P)

AMORGE 20S4P 16Ah 120A (EVE 40P)

72V·16Ah·120A

From $292.00Variants

VOTOL EM260 SGTP 72V (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S5P 20Ah 150A (EVE 40P)

AMORGE 20S5P 20Ah 150A (EVE 40P)

72V·20Ah·150A

From $372.00Variants

VOTOL EM260 SGTP 72V (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S5P 20Ah 150A (EVE 40P) for Tuttio Soleil01

AMORGE 20S5P 20Ah 150A (EVE 40P) for Tuttio Soleil01

72V·20Ah·150A

From $372.00Variants

VOTOL EM260 SGTP 72V (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S6P 24Ah 150A (EVE 40P) for Boom Moto B1

AMORGE 20S6P 24Ah 150A (EVE 40P) for Boom Moto B1

72V·24Ah·150A

From $462.00Variants

VOTOL EM260 SGTP 72V (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S7P 28Ah 210A (EVE 40P)

AMORGE 20S7P 28Ah 210A (EVE 40P)

72V·28Ah·210A

From $493.00Variants

VOTOL EM260 SGTP 72V (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S7P 28Ah 210A (EVE 40P) for Tuttio Soleil01

AMORGE 20S7P 28Ah 210A (EVE 40P) for Tuttio Soleil01

72V·28Ah·210A

From $493.00Variants

VOTOL EM260 SGTP 72V (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S8P 32Ah 200A (EVE 40P) for MX500/SX500/MX650

AMORGE 20S8P 32Ah 200A (EVE 40P) for MX500/SX500/MX650

72V·32Ah·200A

From $553.00Variants

VOTOL EM260 SGTP 72V (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S8P 32Ah 220A (EVE 40P)

AMORGE 20S8P 32Ah 220A (EVE 40P)

72V·32Ah·220A

From $553.00Variants

VOTOL EM260 SGTP 72V (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S8P 32Ah 240A (EVE 40P) for Sur-Ron

AMORGE 20S8P 32Ah 240A (EVE 40P) for Sur-Ron

72V·32Ah·240A

From $600.00Variants

VOTOL EM260 SGTP 72V (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S8P 32Ah 240A (EVE 40P) for Sur-Ron

AMORGE 20S8P 32Ah 240A (EVE 40P) for Sur-Ron

72V·32Ah·240A

From $600.00Variants

VOTOL EM260 SGTP 72V (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S9P 36Ah 270A (EVE 40P)

AMORGE 20S9P 36Ah 270A (EVE 40P)

72V·36Ah·270A

From $624.00Variants

VOTOL EM260 SGTP 72V (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S9P 45Ah 220A (Samsung 50S)

AMORGE 20S9P 45Ah 220A (Samsung 50S)

72V·45Ah·220A

From $626.00Variants

VOTOL EM260 SGTP 72V (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S9P 36Ah 270A (EVE 40P) for ONYX RCR

AMORGE 20S9P 36Ah 270A (EVE 40P) for ONYX RCR

72V·36Ah·270A

From $626.00Variants

VOTOL EM260 SGTP 72V (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S9P 36Ah 220A (EVE 40P) for Sur-Ron

AMORGE 20S9P 36Ah 220A (EVE 40P) for Sur-Ron

72V·36Ah·220A

From $653.00Variants

VOTOL EM260 SGTP 72V (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S10P 40Ah 300A (EVE 40P) for Sur-Ron

AMORGE 20S10P 40Ah 300A (EVE 40P) for Sur-Ron

72V·40Ah·300A

From $687.00Variants

VOTOL EM260 SGTP 72V (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S12P 48Ah 360A (EVE 40P)

AMORGE 20S12P 48Ah 360A (EVE 40P)

72V·48Ah·360A

From $817.00Variants

VOTOL EM260 SGTP 72V (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S12P 48Ah 360A (EVE 40P) for RSF650

AMORGE 20S12P 48Ah 360A (EVE 40P) for RSF650

72V·48Ah·360A

From $823.00Variants

VOTOL EM260 SGTP 72V (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S15P 60Ah 420A (EVE 40P)

AMORGE 20S15P 60Ah 420A (EVE 40P)

72V·60Ah·420A

From $938.00Variants

VOTOL EM260 SGTP 72V (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

Frequently Asked Questions

Ready to build?

Start a new build with the VOTOL EM260 SGTP 72V (LIN/CAN) and pick from 24 compatible components.

We use cookies for analytics. Privacy Policy