Skip to main content

Search

Search components and kits across the catalog

VOTOL EM300S (LIN/CAN)

Components Compatible with VOTOL EM300S (LIN/CAN)

Controller72V300ASinewave

VOTOL EM300S is a high-power 48-72V sinewave controller with 300A rated DC / 550A boost / 700A peak phase (≤39.6kW max power). 36-MOSFET design suited for 8-10kW PMSM/BLDC motors — QS 8000-10000W hub motors and QS165 V3 10kW mid-drive. Features 200% flux weakening, IP67 waterproofing, ≥92% max efficiency, hall sensored. Uses VOTOL's New Version architecture: TE Ampseal 23-pin main signal connector + screw terminals for battery/phase. Dual-protocol: supports SIAECOSYS LIN and CAN BUS displays. Programmable via PC with the V2 CAN USB cable (shared with EM150-2/EM200-2/EM260/EM350S/EM550).

21 components are compatible with the VOTOL EM300S (LIN/CAN), including 20 batteries, 1 hub motor.

20 Batteries1 Hub Motor
AMORGE 13S5P 20Ah 130A (EVE 40P)

AMORGE 13S5P 20Ah 130A (EVE 40P)

48V·20Ah·130A

From $238.00Variants

VOTOL EM300S (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 48V, inrush current is significant.

AMORGE 20S4P 16Ah 120A (EVE 40P)

AMORGE 20S4P 16Ah 120A (EVE 40P)

72V·16Ah·120A

From $292.00Variants

VOTOL EM300S (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S5P 20Ah 150A (EVE 40P)

AMORGE 20S5P 20Ah 150A (EVE 40P)

72V·20Ah·150A

From $372.00Variants

VOTOL EM300S (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S5P 20Ah 150A (EVE 40P) for Tuttio Soleil01

AMORGE 20S5P 20Ah 150A (EVE 40P) for Tuttio Soleil01

72V·20Ah·150A

From $372.00Variants

VOTOL EM300S (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 14S7P 28Ah 210A (EVE 40P)

AMORGE 14S7P 28Ah 210A (EVE 40P)

52V·28Ah·210A

From $387.00Variants

VOTOL EM300S (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 52V, inrush current is significant.

AMORGE 20S7P 28Ah 210A (EVE 40P)

AMORGE 20S7P 28Ah 210A (EVE 40P)

72V·28Ah·210A

From $493.00Variants

VOTOL EM300S (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S7P 28Ah 210A (EVE 40P) for Tuttio Soleil01

AMORGE 20S7P 28Ah 210A (EVE 40P) for Tuttio Soleil01

72V·28Ah·210A

From $493.00Variants

VOTOL EM300S (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S8P 32Ah 200A (EVE 40P) for MX500/SX500/MX650

AMORGE 20S8P 32Ah 200A (EVE 40P) for MX500/SX500/MX650

72V·32Ah·200A

From $553.00Variants

VOTOL EM300S (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S8P 32Ah 220A (EVE 40P)

AMORGE 20S8P 32Ah 220A (EVE 40P)

72V·32Ah·220A

From $553.00Variants

VOTOL EM300S (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S8P 32Ah 240A (EVE 40P) for Sur-Ron

AMORGE 20S8P 32Ah 240A (EVE 40P) for Sur-Ron

72V·32Ah·240A

From $600.00Variants

VOTOL EM300S (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S8P 32Ah 240A (EVE 40P) for Sur-Ron

AMORGE 20S8P 32Ah 240A (EVE 40P) for Sur-Ron

72V·32Ah·240A

From $600.00Variants

VOTOL EM300S (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S9P 36Ah 270A (EVE 40P)

AMORGE 20S9P 36Ah 270A (EVE 40P)

72V·36Ah·270A

From $624.00Variants

VOTOL EM300S (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S9P 45Ah 220A (Samsung 50S)

AMORGE 20S9P 45Ah 220A (Samsung 50S)

72V·45Ah·220A

From $626.00Variants

VOTOL EM300S (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S9P 36Ah 270A (EVE 40P) for ONYX RCR

AMORGE 20S9P 36Ah 270A (EVE 40P) for ONYX RCR

72V·36Ah·270A

From $626.00Variants

VOTOL EM300S (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S9P 36Ah 220A (EVE 40P) for Sur-Ron

AMORGE 20S9P 36Ah 220A (EVE 40P) for Sur-Ron

72V·36Ah·220A

From $653.00Variants

VOTOL EM300S (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S10P 40Ah 300A (EVE 40P) for Sur-Ron

AMORGE 20S10P 40Ah 300A (EVE 40P) for Sur-Ron

72V·40Ah·300A

From $687.00Variants

VOTOL EM300S (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S12P 48Ah 360A (EVE 40P)

AMORGE 20S12P 48Ah 360A (EVE 40P)

72V·48Ah·360A

From $817.00Variants

VOTOL EM300S (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S12P 48Ah 360A (EVE 40P) for RSF650

AMORGE 20S12P 48Ah 360A (EVE 40P) for RSF650

72V·48Ah·360A

From $823.00Variants

VOTOL EM300S (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S15P 60Ah 420A (EVE 40P)

AMORGE 20S15P 60Ah 420A (EVE 40P)

72V·60Ah·420A

From $938.00Variants

VOTOL EM300S (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S10P 40Ah 400A (EVE 40PL)

AMORGE 20S10P 40Ah 400A (EVE 40PL)

72V·40Ah·400A

Price N/AVariants

VOTOL EM300S (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

Frequently Asked Questions

Ready to build?

Start a new build with the VOTOL EM300S (LIN/CAN) and pick from 21 compatible components.

We use cookies for analytics. Privacy Policy