Skip to main content
VOTOL EM550 (LIN/CAN)

Components Compatible with VOTOL EM550 (LIN/CAN)

Controller72V550ASinewave

VOTOL EM550 is VOTOL's flagship high-power 48-72V sinewave controller with 550A rated DC / 1000A boost / 1700A peak phase current (≤72kW max power). 60-72 MOSFET design for 14-18kW PMSM/BLDC motors — targeting high-performance e-moto / motorcycle conversions with QS205 / QS273-class hub motors or QS165 mid-drives. Features 200% flux weakening, IP67 waterproofing, ≥92% max efficiency. Uses VOTOL's New Version architecture: TE Ampseal 23-pin main signal connector + screw terminals for battery/phase. Dual-protocol: SIAECOSYS LIN and CAN BUS. Programmable via PC with V2 CAN USB cable.

Compatibility summary
218 components are compatible with the VOTOL EM550 (LIN/CAN), including 210 batteries, 3 displays, 2 throttles, 3 hub motors.
210 Batterys3 Displays2 Throttles3 Hub Motors
AMORGE 16S3P 12Ah 80A (EVE 40P) for Crazy Cart

AMORGE 16S3P 12Ah 80A (EVE 40P) for Crazy Cart

60V12Ah80A
From $225.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 60V, inrush current is significant.

AMORGE 13S5P 20Ah 130A (EVE 40P)

AMORGE 13S5P 20Ah 130A (EVE 40P)

48V20Ah130A
From $238.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 48V, inrush current is significant.

AMORGE 16S3P 17.4Ah 30A (LG M58T) for Crazy Cart

AMORGE 16S3P 17.4Ah 30A (LG M58T) for Crazy Cart

60V17.4Ah30A
From $269.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 60V, inrush current is significant.

AMORGE 16S4P 20Ah 40A (Samsung 50G) for Crazy Cart

AMORGE 16S4P 20Ah 40A (Samsung 50G) for Crazy Cart

60V20Ah40A
From $269.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 60V, inrush current is significant.

AMORGE 13S5P 25Ah 50A (Samsung 50G)

AMORGE 13S5P 25Ah 50A (Samsung 50G)

48V25Ah50A
From $270.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 48V, inrush current is significant.

AMORGE 20S4P 16Ah 120A (EVE 40P)

AMORGE 20S4P 16Ah 120A (EVE 40P)

72V16Ah120A
From $292.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 13S5P 20Ah 200A (EVE 40PL)

AMORGE 13S5P 20Ah 200A (EVE 40PL)

48V20Ah200A
From $303.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 48V, inrush current is significant.

AMORGE 16S4P 20Ah 80A (Samsung 50S) for Crazy Cart

AMORGE 16S4P 20Ah 80A (Samsung 50S) for Crazy Cart

60V20Ah80A
From $322.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 60V, inrush current is significant.

AMORGE 13S5P 25Ah 220A (EVE 50PL)

AMORGE 13S5P 25Ah 220A (EVE 50PL)

48V25Ah220A
From $367.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 48V, inrush current is significant.

AMORGE 20S5P 20Ah 150A (EVE 40P)

AMORGE 20S5P 20Ah 150A (EVE 40P)

72V20Ah150A
From $372.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 16S4P 18Ah 80A (BAK 45D) for Crazy Cart

AMORGE 16S4P 18Ah 80A (BAK 45D) for Crazy Cart

60V17.6Ah80A
From $378.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 60V, inrush current is significant.

AMORGE 20S4P 16Ah 160A (EVE 40PL)

AMORGE 20S4P 16Ah 160A (EVE 40PL)

72V16Ah160A
From $380.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 16S3P 12.6Ah 100A (Molicel P42A) for Crazy Cart

AMORGE 16S3P 12.6Ah 100A (Molicel P42A) for Crazy Cart

60V12.6Ah100A
From $385.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 60V, inrush current is significant.

AMORGE 14S7P 28Ah 210A (EVE 40P)

AMORGE 14S7P 28Ah 210A (EVE 40P)

52V28Ah210A
From $387.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 52V, inrush current is significant.

AMORGE 16S5P 25Ah 120A (Samsung 50S) for ONYX CTY2

AMORGE 16S5P 25Ah 120A (Samsung 50S) for ONYX CTY2

60V25Ah120A
From $388.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 60V, inrush current is significant.

AMORGE 16S7P 28Ah 210A (EVE 40P) for Valtinsu EM-5

AMORGE 16S7P 28Ah 210A (EVE 40P) for Valtinsu EM-5

60V28Ah210A
From $389.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 60V, inrush current is significant.

AMORGE 13S6P 30Ah 150A (Samsung 50S)

AMORGE 13S6P 30Ah 150A (Samsung 50S)

48V30Ah150A
From $404.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 48V, inrush current is significant.

AMORGE 16S7P 28Ah 210A (EVE 40P)

AMORGE 16S7P 28Ah 210A (EVE 40P)

60V28Ah210A
From $408.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 60V, inrush current is significant.

AMORGE 13S7P 28Ah 280A (EVE 40PL)

AMORGE 13S7P 28Ah 280A (EVE 40PL)

48V28Ah280A
From $411.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 48V, inrush current is significant.

AMORGE 20S4P 20Ah 100A (Samsung 50S)

AMORGE 20S4P 20Ah 100A (Samsung 50S)

72V20Ah100A
From $413.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S5P 20Ah 200A (EVE 40PL)

AMORGE 20S5P 20Ah 200A (EVE 40PL)

72V20Ah200A
From $432.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 13S5P 25Ah 200A (Reliance RS50)

AMORGE 13S5P 25Ah 200A (Reliance RS50)

48V25Ah200A
From $457.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 48V, inrush current is significant.

AMORGE 20S4P 20Ah 200A (EVE 50PL)

AMORGE 20S4P 20Ah 200A (EVE 50PL)

72V20Ah200A
From $458.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 16S5P 25Ah 220A (EVE 50PL)

AMORGE 16S5P 25Ah 220A (EVE 50PL)

60V25Ah220A
From $458.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 60V, inrush current is significant.

AMORGE 20S5P 20Ah 200A (EVE 40PL)

AMORGE 20S5P 20Ah 200A (EVE 40PL)

72V20Ah200A
From $458.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 16S3P 13.5Ah 100A (Molicel P45B) for Crazy Cart

AMORGE 16S3P 13.5Ah 100A (Molicel P45B) for Crazy Cart

60V13.5Ah100A
From $461.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 60V, inrush current is significant.

AMORGE 20S6P 30Ah 240A (EVE 50PL) for Boom Moto B1

AMORGE 20S6P 30Ah 240A (EVE 50PL) for Boom Moto B1

72V30Ah240A
From $462.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S6P 30Ah 240A (Reliance RS50) for Boom Moto B1

AMORGE 20S6P 30Ah 240A (Reliance RS50) for Boom Moto B1

72V30Ah240A
From $462.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S6P 27Ah 270A (Molicel P45B) for Boom Moto B1

AMORGE 20S6P 27Ah 270A (Molicel P45B) for Boom Moto B1

72V27Ah270A
From $462.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S6P 24Ah 150A (EVE 40P) for Boom Moto B1

AMORGE 20S6P 24Ah 150A (EVE 40P) for Boom Moto B1

72V24Ah150A
From $462.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 13S6P 27Ah 180A (BAK 45D)

AMORGE 13S6P 27Ah 180A (BAK 45D)

48V26.4Ah180A
From $471.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 48V, inrush current is significant.

AMORGE 20S5P 25Ah 125A (Samsung 50S)

AMORGE 20S5P 25Ah 125A (Samsung 50S)

72V25Ah125A
From $476.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 13S5P 22.5Ah 175A (Molicel P45B)

AMORGE 13S5P 22.5Ah 175A (Molicel P45B)

48V22.5Ah175A
From $485.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 48V, inrush current is significant.

AMORGE 13S5P 25Ah 125A (Samsung 50S)

AMORGE 13S5P 25Ah 125A (Samsung 50S)

48V25Ah125A
From $486.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 48V, inrush current is significant.

AMORGE 20S7P 28Ah 210A (EVE 40P)

AMORGE 20S7P 28Ah 210A (EVE 40P)

72V28Ah210A
From $493.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 14S7P 28Ah 220A (EVE 40PL)

AMORGE 14S7P 28Ah 220A (EVE 40PL)

52V28Ah220A
From $494.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 52V, inrush current is significant.

AMORGE 20S5P 25Ah 125A (Samsung 50S)

AMORGE 20S5P 25Ah 125A (Samsung 50S)

72V25Ah125A
From $504.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 16S6P 30Ah 150A (Samsung 50S) for Valtinsu EM-5

AMORGE 16S6P 30Ah 150A (Samsung 50S) for Valtinsu EM-5

60V30Ah150A
From $505.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 60V, inrush current is significant.

AMORGE 20S8P 32Ah 220A (EVE 40P) for MX500/SX500/MX650

AMORGE 20S8P 32Ah 220A (EVE 40P) for MX500/SX500/MX650

72V32Ah220A
From $518.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 13S7P 29.4Ah 220A (Molicel P42A)

AMORGE 13S7P 29.4Ah 220A (Molicel P42A)

48V29.4Ah220A
From $542.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 48V, inrush current is significant.

AMORGE 13S8P 40Ah 200A (Samsung 50S) for Valtinsu EM-5

AMORGE 13S8P 40Ah 200A (Samsung 50S) for Valtinsu EM-5

48V40Ah200A
From $542.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 48V, inrush current is significant.

AMORGE 14S7P 31.5Ah 210A (BAK 45D)

AMORGE 14S7P 31.5Ah 210A (BAK 45D)

52V30.8Ah210A
From $549.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 52V, inrush current is significant.

AMORGE 20S8P 32Ah 200A (EVE 40P) for MX500/SX500/MX650

AMORGE 20S8P 32Ah 200A (EVE 40P) for MX500/SX500/MX650

72V32Ah200A
From $553.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S8P 32Ah 220A (EVE 40P)

AMORGE 20S8P 32Ah 220A (EVE 40P)

72V32Ah220A
From $553.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S5P 25Ah 220A (EVE 50PL)

AMORGE 20S5P 25Ah 220A (EVE 50PL)

72V25Ah220A
From $555.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 16S7P 35Ah 175A (Samsung 50S) for Valtinsu EM-5

AMORGE 16S7P 35Ah 175A (Samsung 50S) for Valtinsu EM-5

60V35Ah175A
From $559.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 60V, inrush current is significant.

AMORGE 20S8P 32Ah 240A (EVE 40P) for Sur-Ron

AMORGE 20S8P 32Ah 240A (EVE 40P) for Sur-Ron

72V32Ah240A
From $566.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S8P 32Ah 240A (EVE 40P) for Sur-Ron

AMORGE 20S8P 32Ah 240A (EVE 40P) for Sur-Ron

72V32Ah240A
From $566.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 13S9P 45Ah 220A (Samsung 50S)

AMORGE 13S9P 45Ah 220A (Samsung 50S)

48V45Ah220A
From $567.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 48V, inrush current is significant.

AMORGE 20S5P 25Ah 250A (EVE 50PL) for Valtinsu EM-5

AMORGE 20S5P 25Ah 250A (EVE 50PL) for Valtinsu EM-5

72V25Ah250A
From $568.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 16S5P 25Ah 200A (Reliance RS50)

AMORGE 16S5P 25Ah 200A (Reliance RS50)

60V25Ah200A
From $570.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 60V, inrush current is significant.

AMORGE 20S4P 20Ah 160A (Reliance RS50)

AMORGE 20S4P 20Ah 160A (Reliance RS50)

72V20Ah160A
From $571.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S4P 20Ah 160A (Reliance RS50)

AMORGE 20S4P 20Ah 160A (Reliance RS50)

72V20Ah160A
From $571.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S5P 22.5Ah 150A (BAK 45D)

AMORGE 20S5P 22.5Ah 150A (BAK 45D)

72V22Ah150A
From $574.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 16S3P 15Ah 100A (Molicel P50B) for Crazy Cart

AMORGE 16S3P 15Ah 100A (Molicel P50B) for Crazy Cart

60V15Ah100A
From $585.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 60V, inrush current is significant.

AMORGE 20S4P 18Ah 130A (Molicel P45B)

AMORGE 20S4P 18Ah 130A (Molicel P45B)

72V18Ah130A
From $586.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S4P 18Ah 130A (Molicel P45B)

AMORGE 20S4P 18Ah 130A (Molicel P45B)

72V18Ah130A
From $586.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 16S6P 27Ah 180A (BAK 45D) for Tuttio Soleil01

AMORGE 16S6P 27Ah 180A (BAK 45D) for Tuttio Soleil01

60V26.4Ah180A
From $588.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 60V, inrush current is significant.

AMORGE 13S8P 40Ah 340A (EVE 50PL) for Valtinsu EM-5

AMORGE 13S8P 40Ah 340A (EVE 50PL) for Valtinsu EM-5

48V40Ah340A
From $588.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 48V, inrush current is significant.

AMORGE 20S6P 24Ah 220A (EVE 40PL)

AMORGE 20S6P 24Ah 220A (EVE 40PL)

72V24Ah220A
From $597.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 16S6P 25.2Ah 210A (Molicel P42A) for Valtinsu EM-5

AMORGE 16S6P 25.2Ah 210A (Molicel P42A) for Valtinsu EM-5

60V25.2Ah210A
From $598.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 60V, inrush current is significant.

AMORGE 13S5P 21Ah 130A (Molicel P42A)

AMORGE 13S5P 21Ah 130A (Molicel P42A)

48V21Ah130A
From $607.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 48V, inrush current is significant.

AMORGE 20S5P 22.5Ah 150A (BAK 45D) for Tuttio Soleil01

AMORGE 20S5P 22.5Ah 150A (BAK 45D) for Tuttio Soleil01

72V22Ah150A
From $609.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S5P 22.5Ah 150A (BAK 45D) for Valtinsu EM-5

AMORGE 20S5P 22.5Ah 150A (BAK 45D) for Valtinsu EM-5

72V22Ah150A
From $609.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S9P 36Ah 220A (EVE 40P) for Sur-Ron

AMORGE 20S9P 36Ah 220A (EVE 40P) for Sur-Ron

72V36Ah220A
From $614.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S6P 30Ah 220A (EVE 50PL)

AMORGE 20S6P 30Ah 220A (EVE 50PL)

72V30Ah220A
From $618.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S5P 21Ah 175A (Molicel P42A) for Valtinsu EM-5

AMORGE 20S5P 21Ah 175A (Molicel P42A) for Valtinsu EM-5

72V21Ah175A
From $620.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 16S8P 32Ah 320A (EVE 40PL)

AMORGE 16S8P 32Ah 320A (EVE 40PL)

60V32Ah320A
From $621.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 60V, inrush current is significant.

AMORGE 14S7P 29.4Ah 245A (Molicel P42A) for Valtinsu EM-5

AMORGE 14S7P 29.4Ah 245A (Molicel P42A) for Valtinsu EM-5

52V29.4Ah245A
From $622.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 52V, inrush current is significant.

AMORGE 20S9P 36Ah 270A (EVE 40P)

AMORGE 20S9P 36Ah 270A (EVE 40P)

72V36Ah270A
From $624.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S7P 28Ah 280A (EVE 40PL)

AMORGE 20S7P 28Ah 280A (EVE 40PL)

72V28Ah280A
From $626.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S9P 45Ah 220A (Samsung 50S)

AMORGE 20S9P 45Ah 220A (Samsung 50S)

72V45Ah220A
From $626.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 13S7P 31.5Ah 220A (Molicel P45B)

AMORGE 13S7P 31.5Ah 220A (Molicel P45B)

48V31.5Ah220A
From $628.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 48V, inrush current is significant.

AMORGE 20S5P 25Ah 130A (Reliance RS50)

AMORGE 20S5P 25Ah 130A (Reliance RS50)

72V25Ah130A
From $643.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 13S8P 36Ah 240A (BAK 45D) for Valtinsu EM-5

AMORGE 13S8P 36Ah 240A (BAK 45D) for Valtinsu EM-5

48V35.2Ah240A
From $644.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 48V, inrush current is significant.

AMORGE 13S7P 35Ah 280A (Reliance RS50)

AMORGE 13S7P 35Ah 280A (Reliance RS50)

48V35Ah280A
From $648.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 48V, inrush current is significant.

AMORGE 20S6P 30Ah 300A (EVE 50PL) for Valtinsu EM-5

AMORGE 20S6P 30Ah 300A (EVE 50PL) for Valtinsu EM-5

72V30Ah300A
From $665.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 16S7P 31.5Ah 210A (BAK 45D)

AMORGE 16S7P 31.5Ah 210A (BAK 45D)

60V30.8Ah210A
From $674.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 60V, inrush current is significant.

AMORGE 20S7P 35Ah 175A (Samsung 50S) for eBox 2.0

AMORGE 20S7P 35Ah 175A (Samsung 50S) for eBox 2.0

72V35Ah175A
From $679.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S6P 27Ah 180A (BAK 45D)

AMORGE 20S6P 27Ah 180A (BAK 45D)

72V26.4Ah180A
From $681.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S10P 40Ah 300A (EVE 40P) for Sur-Ron

AMORGE 20S10P 40Ah 300A (EVE 40P) for Sur-Ron

72V40Ah300A
From $687.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S5P 22.5Ah 170A (Molicel P45B)

AMORGE 20S5P 22.5Ah 170A (Molicel P45B)

72V22.5Ah170A
From $693.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 13S7P 31.5Ah 220A (Molicel P45B)

AMORGE 13S7P 31.5Ah 220A (Molicel P45B)

48V31.5Ah220A
From $694.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 48V, inrush current is significant.

AMORGE 14S7P 31.5Ah 245A (Molicel P45B) for Valtinsu EM-5

AMORGE 14S7P 31.5Ah 245A (Molicel P45B) for Valtinsu EM-5

52V31.5Ah245A
From $696.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 52V, inrush current is significant.

AMORGE 20S5P 25Ah 200A (Reliance RS50)

AMORGE 20S5P 25Ah 200A (Reliance RS50)

72V25Ah200A
From $696.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S5P 25Ah 200A (Reliance RS50) for Tuttio Soleil01

AMORGE 20S5P 25Ah 200A (Reliance RS50) for Tuttio Soleil01

72V25Ah200A
From $696.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 16S6P 27Ah 210A (Molicel P45B) for Tuttio Soleil01

AMORGE 16S6P 27Ah 210A (Molicel P45B) for Tuttio Soleil01

60V27Ah210A
From $702.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 60V, inrush current is significant.

AMORGE 13S5P 22.5Ah 130A (Molicel P45B)

AMORGE 13S5P 22.5Ah 130A (Molicel P45B)

48V22.5Ah130A
From $702.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 48V, inrush current is significant.

AMORGE 16S6P 27Ah 210A (Molicel P45B) for Valtinsu EM-5

AMORGE 16S6P 27Ah 210A (Molicel P45B) for Valtinsu EM-5

60V27Ah210A
From $712.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 60V, inrush current is significant.

AMORGE 20S6P 27Ah 180A (BAK 45D)

AMORGE 20S6P 27Ah 180A (BAK 45D)

72V26.4Ah180A
From $717.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S7P 35Ah 340A (EVE 50PL)

AMORGE 20S7P 35Ah 340A (EVE 50PL)

72V35Ah340A
From $722.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S8P 32Ah 220A (EVE 40PL) for MX500/SX500/MX650

AMORGE 20S8P 32Ah 220A (EVE 40PL) for MX500/SX500/MX650

72V32Ah220A
From $730.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 13S8P 36Ah 280A (Molicel P45B) for Valtinsu EM-5

AMORGE 13S8P 36Ah 280A (Molicel P45B) for Valtinsu EM-5

48V36Ah280A
From $734.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 48V, inrush current is significant.

AMORGE 20S6P 25.2Ah 210A (Molicel P42A)

AMORGE 20S6P 25.2Ah 210A (Molicel P42A)

72V25.2Ah210A
From $739.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S5P 22.5Ah 175A (Molicel P45B) for Valtinsu EM-5

AMORGE 20S5P 22.5Ah 175A (Molicel P45B) for Valtinsu EM-5

72V22.5Ah175A
From $739.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 16S10P 50Ah 220A (Samsung 50S) for MX500/SX500/MX650

AMORGE 16S10P 50Ah 220A (Samsung 50S) for MX500/SX500/MX650

60V50Ah220A
From $752.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 60V, inrush current is significant.

AMORGE 20S8P 32Ah 220A (EVE 40PL) for MX500/SX500/MX650

AMORGE 20S8P 32Ah 220A (EVE 40PL) for MX500/SX500/MX650

72V32Ah220A
From $773.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 14S9P 37.8Ah 315A (Molicel P42A)

AMORGE 14S9P 37.8Ah 315A (Molicel P42A)

52V37.8Ah315A
From $776.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 52V, inrush current is significant.

AMORGE 20S6P 30Ah 220A (Reliance RS50)

AMORGE 20S6P 30Ah 220A (Reliance RS50)

72V30Ah220A
From $781.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 16S7P 35Ah 220A (Reliance RS50)

AMORGE 16S7P 35Ah 220A (Reliance RS50)

60V35Ah220A
From $783.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 60V, inrush current is significant.

AMORGE 16S7P 35Ah 280A (Reliance RS50) for Valtinsu EM-5

AMORGE 16S7P 35Ah 280A (Reliance RS50) for Valtinsu EM-5

60V35Ah280A
From $784.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 60V, inrush current is significant.

AMORGE 13S9P 45Ah 340A (Reliance RS50) for Valtinsu EM-5

AMORGE 13S9P 45Ah 340A (Reliance RS50) for Valtinsu EM-5

48V45Ah340A
From $784.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 48V, inrush current is significant.

AMORGE 20S9P 36Ah 340A (EVE 40PL)

AMORGE 20S9P 36Ah 340A (EVE 40PL)

72V36Ah340A
From $793.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S8P 40Ah 200A (Samsung 50S) for Sur-Ron

AMORGE 20S8P 40Ah 200A (Samsung 50S) for Sur-Ron

72V40Ah200A
From $795.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S8P 40Ah 200A (Samsung 50S) for Tuttio Soleil01

AMORGE 20S8P 40Ah 200A (Samsung 50S) for Tuttio Soleil01

72V40Ah200A
From $795.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S8P 40Ah 200A (Samsung 50S)

AMORGE 20S8P 40Ah 200A (Samsung 50S)

72V40Ah200A
From $795.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 16S10P 50Ah 220A (Samsung 50S) for MX500/SX500/MX650

AMORGE 16S10P 50Ah 220A (Samsung 50S) for MX500/SX500/MX650

60V50Ah220A
From $796.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 60V, inrush current is significant.

AMORGE 13S7P 35Ah 280A (Molicel P50B)

AMORGE 13S7P 35Ah 280A (Molicel P50B)

48V35Ah280A
From $798.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 48V, inrush current is significant.

AMORGE 20S7P 29.4Ah 315A (Molicel P42A) for eBox 2.0

AMORGE 20S7P 29.4Ah 315A (Molicel P42A) for eBox 2.0

72V29.4Ah315A
From $815.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S12P 48Ah 360A (EVE 40P)

AMORGE 20S12P 48Ah 360A (EVE 40P)

72V48Ah360A
From $817.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 16S7P 31.5Ah 220A (Molicel P45B)

AMORGE 16S7P 31.5Ah 220A (Molicel P45B)

60V31.5Ah220A
From $820.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 60V, inrush current is significant.

AMORGE 20S6P 30Ah 220A (Reliance RS50) for Valtinsu EM-5

AMORGE 20S6P 30Ah 220A (Reliance RS50) for Valtinsu EM-5

72V30Ah220A
From $821.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S12P 48Ah 360A (EVE 40P) for RSF650

AMORGE 20S12P 48Ah 360A (EVE 40P) for RSF650

72V48Ah360A
From $823.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 13S9P 40.5Ah 315A (Molicel P45B)

AMORGE 13S9P 40.5Ah 315A (Molicel P45B)

48V40.5Ah315A
From $826.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 48V, inrush current is significant.

AMORGE 20S6P 30Ah 220A (Reliance RS50)

AMORGE 20S6P 30Ah 220A (Reliance RS50)

72V30Ah220A
From $830.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 16S7P 31.5Ah 245A (Molicel P45B) for Valtinsu EM-5

AMORGE 16S7P 31.5Ah 245A (Molicel P45B) for Valtinsu EM-5

60V31.5Ah245A
From $832.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 60V, inrush current is significant.

AMORGE 20S9P 45Ah 220A (Samsung 50S)

AMORGE 20S9P 45Ah 220A (Samsung 50S)

72V45Ah220A
From $837.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S9P 36Ah 220A (EVE 40PL) for Sur-Ron

AMORGE 20S9P 36Ah 220A (EVE 40PL) for Sur-Ron

72V36Ah220A
From $847.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S5P 25Ah 130A (Molicel P50B)

AMORGE 20S5P 25Ah 130A (Molicel P50B)

72V25Ah130A
From $873.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S9P 45Ah 220A (Samsung 50S) for ONYX RCR

AMORGE 20S9P 45Ah 220A (Samsung 50S) for ONYX RCR

72V45Ah220A
From $886.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S5P 25Ah 200A (Molicel P50B)

AMORGE 20S5P 25Ah 200A (Molicel P50B)

72V25Ah200A
From $891.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S8P 36Ah 220A (BAK 45D) for MX500/SX500/MX650

AMORGE 20S8P 36Ah 220A (BAK 45D) for MX500/SX500/MX650

72V35.2Ah220A
From $897.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 16S6P 30Ah 220A (Molicel P50B)

AMORGE 16S6P 30Ah 220A (Molicel P50B)

60V30Ah220A
From $899.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 60V, inrush current is significant.

AMORGE 13S5P 25Ah 130A (Molicel P50B)

AMORGE 13S5P 25Ah 130A (Molicel P50B)

48V25Ah130A
From $899.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 48V, inrush current is significant.

AMORGE 16S6P 30Ah 220A (Molicel P50B) for Valtinsu EM-5

AMORGE 16S6P 30Ah 220A (Molicel P50B) for Valtinsu EM-5

60V30Ah220A
From $899.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 60V, inrush current is significant.

AMORGE 20S7P 35Ah 280A (Reliance RS50)

AMORGE 20S7P 35Ah 280A (Reliance RS50)

72V35Ah280A
From $912.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S8P 33.6Ah 220A (Molicel P42A) for MX500/SX500/MX650

AMORGE 20S8P 33.6Ah 220A (Molicel P42A) for MX500/SX500/MX650

72V33.6Ah220A
From $914.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S8P 36Ah 240A (BAK 45D) for Sur-Ron

AMORGE 20S8P 36Ah 240A (BAK 45D) for Sur-Ron

72V35.2Ah240A
From $934.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S15P 60Ah 420A (EVE 40P)

AMORGE 20S15P 60Ah 420A (EVE 40P)

72V60Ah420A
From $938.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S11P 44Ah 400A (EVE 40PL)

AMORGE 20S11P 44Ah 400A (EVE 40PL)

72V44Ah400A
From $946.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S10P 40Ah 340A (EVE 40PL) for Sur-Ron

AMORGE 20S10P 40Ah 340A (EVE 40PL) for Sur-Ron

72V40Ah340A
From $946.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S10P 40Ah 400A (EVE 40PL)

AMORGE 20S10P 40Ah 400A (EVE 40PL)

72V40Ah400A
From $955.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S9P 45Ah 340A (EVE 50PL) for ONYX RCR

AMORGE 20S9P 45Ah 340A (EVE 50PL) for ONYX RCR

72V45Ah340A
From $957.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S8P 33.6Ah 220A (Molicel P42A) for MX500/SX500/MX650

AMORGE 20S8P 33.6Ah 220A (Molicel P42A) for MX500/SX500/MX650

72V33.6Ah220A
From $963.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S7P 31.5Ah 315A (Molicel P45B) for eBox 2.0

AMORGE 20S7P 31.5Ah 315A (Molicel P45B) for eBox 2.0

72V31.5Ah315A
From $982.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S9P 40.5Ah 270A (BAK 45D)

AMORGE 20S9P 40.5Ah 270A (BAK 45D)

72V39.6Ah270A
From $999.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S7P 31.5Ah 220A (Molicel P45B) for Tuttio Soleil01

AMORGE 20S7P 31.5Ah 220A (Molicel P45B) for Tuttio Soleil01

72V31.5Ah220A
From $1,007.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S7P 31.5Ah 220A (Molicel P45B)

AMORGE 20S7P 31.5Ah 220A (Molicel P45B)

72V31.5Ah220A
From $1,007.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S9P 37.8Ah 315A (Molicel P42A)

AMORGE 20S9P 37.8Ah 315A (Molicel P42A)

72V37.8Ah315A
From $1,018.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 16S7P 35Ah 220A (Molicel P50B)

AMORGE 16S7P 35Ah 220A (Molicel P50B)

60V35Ah220A
From $1,037.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 60V, inrush current is significant.

AMORGE 20S9P 40.5Ah 220A (BAK 45D) for Sur-Ron

AMORGE 20S9P 40.5Ah 220A (BAK 45D) for Sur-Ron

72V39.6Ah220A
From $1,041.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 16S7P 35Ah 280A (Molicel P50B) for Valtinsu EM-5

AMORGE 16S7P 35Ah 280A (Molicel P50B) for Valtinsu EM-5

60V35Ah280A
From $1,050.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 60V, inrush current is significant.

AMORGE 20S10P 50Ah 340A (EVE 50PL) for Sur-Ron

AMORGE 20S10P 50Ah 340A (EVE 50PL) for Sur-Ron

72V50Ah340A
From $1,054.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S9P 37.8Ah 315A (Molicel P42A)

AMORGE 20S9P 37.8Ah 315A (Molicel P42A)

72V37.8Ah315A
From $1,074.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S9P 37.8Ah 315A (Molicel P42A) for ONYX RCR

AMORGE 20S9P 37.8Ah 315A (Molicel P42A) for ONYX RCR

72V37.8Ah315A
From $1,074.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S11P 55Ah 275A (Samsung 50S)

AMORGE 20S11P 55Ah 275A (Samsung 50S)

72V55Ah275A
From $1,080.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S8P 40Ah 320A (Reliance RS50) for Sur-Ron

AMORGE 20S8P 40Ah 320A (Reliance RS50) for Sur-Ron

72V40Ah320A
From $1,084.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S11P 55Ah 420A (EVE 50PL)

AMORGE 20S11P 55Ah 420A (EVE 50PL)

72V55Ah420A
From $1,103.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S6P 30Ah 220A (Molicel P50B) for Valtinsu EM-5

AMORGE 20S6P 30Ah 220A (Molicel P50B) for Valtinsu EM-5

72V30Ah220A
From $1,107.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S8P 36Ah 280A (Molicel P45B) for Sur-Ron

AMORGE 20S8P 36Ah 280A (Molicel P45B) for Sur-Ron

72V36Ah280A
From $1,153.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S8P 36Ah 280A (Molicel P45B)

AMORGE 20S8P 36Ah 280A (Molicel P45B)

72V36Ah280A
From $1,154.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S8P 36Ah 280A (Molicel P45B) for Tuttio Soleil01

AMORGE 20S8P 36Ah 280A (Molicel P45B) for Tuttio Soleil01

72V36Ah280A
From $1,154.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S10P 45Ah 330A (BAK 45D) for Sur-Ron

AMORGE 20S10P 45Ah 330A (BAK 45D) for Sur-Ron

72V44Ah330A
From $1,162.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S11P 55Ah 420A (EVE 50PL)

AMORGE 20S11P 55Ah 420A (EVE 50PL)

72V55Ah420A
From $1,165.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S8P 40Ah 320A (Molicel P50B) for Tuttio Soleil01

AMORGE 20S8P 40Ah 320A (Molicel P50B) for Tuttio Soleil01

72V40Ah320A
From $1,165.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S12P 60Ah 300A (Samsung 50S)

AMORGE 20S12P 60Ah 300A (Samsung 50S)

72V60Ah300A
From $1,171.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S12P 60Ah 300A (Samsung 50S) for RSF650

AMORGE 20S12P 60Ah 300A (Samsung 50S) for RSF650

72V60Ah300A
From $1,181.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S10P 42Ah 340A (Molicel P42A) for Sur-Ron

AMORGE 20S10P 42Ah 340A (Molicel P42A) for Sur-Ron

72V42Ah340A
From $1,184.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S11P 49.5Ah 330A (BAK 45D)

AMORGE 20S11P 49.5Ah 330A (BAK 45D)

72V48.4Ah330A
From $1,204.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S9P 45Ah 340A (Reliance RS50) for ONYX RCR

AMORGE 20S9P 45Ah 340A (Reliance RS50) for ONYX RCR

72V45Ah340A
From $1,210.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S13P 52Ah 420A (EVE 40PL) for Honda CRF 450

AMORGE 20S13P 52Ah 420A (EVE 40PL) for Honda CRF 450

72V52Ah420A
From $1,219.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S11P 46.2Ah 385A (Molicel P42A)

AMORGE 20S11P 46.2Ah 385A (Molicel P42A)

72V46.2Ah385A
From $1,236.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S12P 60Ah 420A (EVE 50PL)

AMORGE 20S12P 60Ah 420A (EVE 50PL)

72V60Ah420A
From $1,262.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S11P 49.5Ah 330A (BAK 45D)

AMORGE 20S11P 49.5Ah 330A (BAK 45D)

72V48.4Ah330A
From $1,270.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S13P 65Ah 325A (Samsung 50S)

AMORGE 20S13P 65Ah 325A (Samsung 50S)

72V65Ah325A
From $1,272.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S13P 65Ah 420A (EVE 50PL)

AMORGE 20S13P 65Ah 420A (EVE 50PL)

72V65Ah420A
From $1,272.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S9P 40.5Ah 315A (Molicel P45B) for MXR

AMORGE 20S9P 40.5Ah 315A (Molicel P45B) for MXR

72V40.5Ah315A
From $1,288.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S9P 40.5Ah 315A (Molicel P45B)

AMORGE 20S9P 40.5Ah 315A (Molicel P45B)

72V40.5Ah315A
From $1,288.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S7P 35Ah 280A (Molicel P50B)

AMORGE 20S7P 35Ah 280A (Molicel P50B)

72V35Ah280A
From $1,292.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S7P 35Ah 280A (Molicel P50B) for Tuttio Soleil01

AMORGE 20S7P 35Ah 280A (Molicel P50B) for Tuttio Soleil01

72V35Ah280A
From $1,292.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S11P 46.2Ah 385A (Molicel P42A)

AMORGE 20S11P 46.2Ah 385A (Molicel P42A)

72V46.2Ah385A
From $1,303.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S10P 50Ah 340A (Reliance RS50) for Sur-Ron

AMORGE 20S10P 50Ah 340A (Reliance RS50) for Sur-Ron

72V50Ah340A
From $1,335.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S12P 50.4Ah 420A (Molicel P42A)

AMORGE 20S12P 50.4Ah 420A (Molicel P42A)

72V50.4Ah420A
From $1,345.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S10P 50Ah 400A (Reliance RS50)

AMORGE 20S10P 50Ah 400A (Reliance RS50)

72V50Ah400A
From $1,351.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S13P 65Ah 420A (EVE 50PL) for Honda CR 250

AMORGE 20S13P 65Ah 420A (EVE 50PL) for Honda CR 250

72V65Ah420A
From $1,360.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S15P 75Ah 375A (Samsung 50S)

AMORGE 20S15P 75Ah 375A (Samsung 50S)

72V75Ah375A
From $1,372.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 16S10P 50Ah 220A (Molicel P50B) for MX500/SX500/MX650

AMORGE 16S10P 50Ah 220A (Molicel P50B) for MX500/SX500/MX650

60V50Ah220A
From $1,387.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 60V, inrush current is significant.

AMORGE 20S8P 40Ah 320A (Molicel P50B)

AMORGE 20S8P 40Ah 320A (Molicel P50B)

72V40Ah320A
From $1,465.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S13P 58.8Ah 390A (BAK 45D)

AMORGE 20S13P 58.8Ah 390A (BAK 45D)

72V57.2Ah390A
From $1,496.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S11P 49.5Ah 385A (Molicel P45B)

AMORGE 20S11P 49.5Ah 385A (Molicel P45B)

72V49.5Ah385A
From $1,565.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S9P 45Ah 220A (Molicel P50B) for Sur-Ron

AMORGE 20S9P 45Ah 220A (Molicel P50B) for Sur-Ron

72V45Ah220A
From $1,625.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S9P 45Ah 340A (Molicel P50B) for ONYX RCR

AMORGE 20S9P 45Ah 340A (Molicel P50B) for ONYX RCR

72V45Ah340A
From $1,638.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S9P 45Ah 340A (Molicel P50B)

AMORGE 20S9P 45Ah 340A (Molicel P50B)

72V45Ah340A
From $1,638.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S12P 54Ah 420A (Molicel P45B) for RSF650

AMORGE 20S12P 54Ah 420A (Molicel P45B) for RSF650

72V54Ah420A
From $1,700.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S13P 65Ah 420A (Reliance RS50)

AMORGE 20S13P 65Ah 420A (Reliance RS50)

72V65Ah420A
From $1,725.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 16S12P 60Ah 340A (Molicel P50B) for Sur-Ron

AMORGE 16S12P 60Ah 340A (Molicel P50B) for Sur-Ron

60V60Ah340A
From $1,742.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 60V, inrush current is significant.

AMORGE 20S10P 50Ah 340A (Molicel P50B) for Valtinsu EM-23

AMORGE 20S10P 50Ah 340A (Molicel P50B) for Valtinsu EM-23

72V50Ah340A
From $1,811.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S11P 55Ah 420A (Molicel P50B)

AMORGE 20S11P 55Ah 420A (Molicel P50B)

72V55Ah420A
From $1,907.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S11P 55Ah 420A (Molicel P50B)

AMORGE 20S11P 55Ah 420A (Molicel P50B)

72V55Ah420A
From $1,997.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S15P 67.5Ah 420A (Molicel P45B)

AMORGE 20S15P 67.5Ah 420A (Molicel P45B)

72V67.5Ah420A
From $2,003.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S13P 65Ah 420A (Molicel P50B)

AMORGE 20S13P 65Ah 420A (Molicel P50B)

72V65Ah420A
From $2,343.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S15P 75Ah 420A (Molicel P50B)

AMORGE 20S15P 75Ah 420A (Molicel P50B)

72V75Ah420A
From $2,401.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S16P 80Ah 420A (Molicel P50B)

AMORGE 20S16P 80Ah 420A (Molicel P50B)

72V80Ah420A
From $2,732.00
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S8P 40Ah 320A (Reliance RS50)

AMORGE 20S8P 40Ah 320A (Reliance RS50)

72V40Ah320A
Price N/A
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S10P 50Ah 400A (EVE 50PL)

AMORGE 20S10P 50Ah 400A (EVE 50PL)

72V50Ah400A
Price N/A
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S12P 50.4Ah 420A (Molicel P42A) for Super73 Z Series

AMORGE 20S12P 50.4Ah 420A (Molicel P42A) for Super73 Z Series

72V50.4Ah420A
Price N/A
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S8P 32Ah 220A (EVE 40P)

AMORGE 20S8P 32Ah 220A (EVE 40P)

72V32Ah220A
Price N/A
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S10P 50Ah 250A (Samsung 50S) for Sur-Ron

AMORGE 20S10P 50Ah 250A (Samsung 50S) for Sur-Ron

72V50Ah250A
Price N/A
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 72V 50Ah 250A (Samsung 50S) for ONYX RCR

AMORGE 72V 50Ah 250A (Samsung 50S) for ONYX RCR

72V50Ah250A
Price N/A
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S10P 40Ah 400A (EVE 40PL)

AMORGE 20S10P 40Ah 400A (EVE 40PL)

72V40Ah400A
Price N/A
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 72V 42Ah 350A (Molicel P42A) for ONYX RCR

AMORGE 72V 42Ah 350A (Molicel P42A) for ONYX RCR

72V42Ah350A
Price N/A
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S10P 42Ah 340A (Molicel P42A)

AMORGE 20S10P 42Ah 340A (Molicel P42A)

72V42Ah340A
Price N/A
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S10P 45Ah 300A (BAK 45D)

AMORGE 20S10P 45Ah 300A (BAK 45D)

72V44Ah300A
Price N/A
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 72V 45Ah 300A (Molicel P45B) for ONYX RCR

AMORGE 72V 45Ah 300A (Molicel P45B) for ONYX RCR

72V45Ah300A
Price N/A
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S10P 40Ah 340A (EVE 40PL) for Sur-Ron

AMORGE 20S10P 40Ah 340A (EVE 40PL) for Sur-Ron

72V40Ah340A
Price N/A
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S8P 40Ah 200A (Samsung 50S)

AMORGE 20S8P 40Ah 200A (Samsung 50S)

72V40Ah200A
Price N/A
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S10P 45Ah 450A (Molicel P45B)

AMORGE 20S10P 45Ah 450A (Molicel P45B)

72V45Ah450A
Price N/A
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S10P 40Ah 400A (EVE 40PL)

AMORGE 20S10P 40Ah 400A (EVE 40PL)

72V40Ah400A
Price N/A
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S8P 36Ah 240A (BAK 45D)

AMORGE 20S8P 36Ah 240A (BAK 45D)

72V35.2Ah240A
Price N/A
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

AMORGE 20S10P 50Ah 340A (EVE 50PL) for Sur-Ron

AMORGE 20S10P 50Ah 340A (EVE 50PL) for Sur-Ron

72V50Ah340A
Price N/A
VariantsPartial

VOTOL EM550 (LIN/CAN) requires a pre-charge circuit. Use an anti-spark connector (e.g., XT90-S) or a pre-charge resistor circuit between the battery and controller to prevent capacitor inrush that welds connectors and pits contacts. At 72V, inrush current is significant.

Frequently Asked Questions

Ready to build?

Start a new build with the VOTOL EM550 (LIN/CAN) and pick from 218 compatible components.

We use cookies for analytics and to support affiliate links. Privacy Policy