NBPower 26" 2000W Rear Hub Motor
48-72V 2000W direct-drive rear hub motor with 70.00Nm torque. 135mm dropout, disc brake compatible, 36-spoke, pre-laced with 26" inch rim with threaded freewheel.
In brief: 2000W rear hub motor. 26" wheel. Fits 135.0–142.0mm dropout. 48–72V rated. Disc brake compatible. From $249.
Performance
- Type
- Direct Drive
- Wattage
- 2000W
- Rated Voltage
- 48–72V
- Rated RPM
- 700
- Pole Pairs
- 23
- Max Torque
- 70.00Nm
- Max Speed
- 70km/h
Fitment
- Position
- Rear
- Dropout Width
- 135mm – 142mm
- Axle Size
- M14
Wheel
- Pre-laced
- Yes
- Wheel Size
- 26"
- Disc Brake
- Yes
- Rim Brake
- No
- Spoke Holes
- 36
- Freehub Type
- Threaded (Screw-on Freewheel)
Ports & Connectors
Phase Wires
Motor Phase
1Phase A
2Phase B
3Phase C
Hall Sensor
Speed SensorHall Sensor
1Ground
2Speed Signal
33.3V Power
4Hall A
5Hall B
6Hall C
Where to Find
Prices tracked across 1 seller* Shipping estimates are for the contiguous US and may vary by location.
* Some seller links on this page are affiliate links. If you purchase through them, WattWorks may earn a small commission at no extra cost to you. Affiliate status does not influence which products appear, how they are ranked, or the prices shown. Learn more here
