VOTOL EM/SV-series Function Harness (CAN)
Function harness for VOTOL CAN-variant controllers (EM80 CAN, SV120 CAN, and other EM/SV-series CAN variants). Molex 5557-2-2×8 (16-pin) controller-side plug breaks out to six DJ70xx automotive connectors: P mode, Throttle/High brake/Display (CAN_H+CAN_L instead of ONE_WIRE_COMM), Program debugging, E-lock, Speed Switch/Sport Mode/Reverse, Low brake. Same physical cable as the LIN harness — only the signal assignments on the Throttle/Brake/Display breakout differ (CAN uses 2 signal wires; LIN uses 1).
In brief: Wire harness.
Specifications
- Main Connector
Ports & Connectors
Ignition
Power Switch
1Power Switch Signal
Low Brake / Reverse
DisplayBrake
1None
2Gear Reverse
3None
4Brake Signal
Three Speed / Sport / Parking
BrakeDisplay
1Parking / E-Brake
2Gear Low
3Gear Sport
4None
5Ground
6Gear High
Throttle / High Brake / Display
BrakeCAN BusThrottle
1Brake Signal
2CAN High
3CAN Low
4Ground
5Throttle Signal
65V Power
Program Port
UART
1Ground
25V Power
3UART TX
4UART RX
One Click Repair
COMM
1None
2One-Click Repair
