MakerX Go-FOC S100 vs MakerX Go-FOC SV6
Verdict
The MakerX Go-FOC S100 handles 60 A continuous versus 40 A. The MakerX Go-FOC SV6 is lighter at 148 g versus 237 g.
Specification Comparison
| Spec | MakerX Go-FOC S100 | MakerX Go-FOC SV6 |
|---|---|---|
| Power & Performance | ||
| Min Voltage | 12 V+4V | 8 V |
| Max Voltage | 96 V+36V | 60 V |
| Continuous Amps | 60 A+20A | 40 A |
| Peak Amps | 100 A+20A | 80 A |
| Physical | ||
| Weight (g) | 237 g | 148 g-89g |
| Length (mm) | 70.0 mm | 60.0 mm-10mm |
| Width (mm) | 70.0 mm | 40.0 mm-30mm |
| Height (mm) | 18.4 mm-4.6mm | 23.0 mm |
| Features | ||
| VESC-Based | Yes | Yes |
| Regen Support | Yes | Yes |
| Drive Mode | foc | foc |
| Sensor Mode | dual_mode | dual_mode |
| Dual Motor | No | No |
| Controller Pairing | No | No |
| Programmable via PC | yes | yes |
| Requires Display | No | No |
| Display Support | No | No |
| Display Protocols | VESC | VESC |
| Throttle Support | Yes | Yes |
| PAS Support | No | No |
| Power Switch Support | Yes | No |
| Other | ||
| Max Phase Amps | 200 A+80A | 120 A |
| Cooling | air | air |
| Pricing | ||
| Sellers in Stock | 0 | 0 |