MakerX Go-FOC S100
The MakerX Go-FOC S100 is a single VESC-based ESC built on VESC100250 hardware with a built-in BMI160 IMU for self-balancing applications (electric balance vehicles, Onewheel-style boards). Rated 12-96V (4-21s) with 60A continuous / 100A peak battery current and up to 200A peak phase current. Includes phase filtering, a built-in power switch with auto power-off, and is configured via VESC Tool.
In brief: 12–96V controller. 60A continuous. 100A peak. VESC, FOC, dual mode, regen support. From $165.
Where to Find
Prices tracked across 1 sellerSpecifications
Type
- VESC Based
- Yes
- Cooling
- Air
Electrical
- Voltage Range
- 12–96V
- Continuous Amps
- 60A
- Peak Amps
- 100A
- Max Phase Amps
- 200A
Motor Features
- Regen Support
- Yes
- Drive Mode
- FOC
- Sensor Mode
- Dual Mode
- Dual Motor Support
- No
- Controller Pairing
- No
Inputs
- Throttle Support
- Yes
- PAS Support
- No
Display
- Supports Display
- No
- Requires Display
- No
- Protocols
- VESC
Power Switch
- Supports Power Switch
- Yes
Programming
- Via PC
- Yes
Physical
- Weight
- 237 g
- Dimensions (L×W×H)
- 70mm × 70mm × 18.4mm
Ports & Connectors
Motor Phases3 wires
Motor Phase
1Phase A
2Phase B
3Phase C
Hall Sensor
TemperatureHall Sensor
15V Power
2Motor Temp
3Hall A
4Hall B
5Hall C
6Ground
Power Switch
Power Switch
1Power Switch Signal
2Ground
Throttle / PPM
Throttle
1Ground
25V Power
3Throttle Signal
UART / Comm
UART
1Ground
25V Power
3UART RX
4UART TX
CAN Bus
CAN Bus
1Ground
25V Power
3CAN High
4CAN Low
Battery Input/
