Components Compatible with VOTOL EM100 CAN
VOTOL EM100 sine wave controller with CAN BUS display protocol. 48-72V, 100A continuous DC / 120A boost DC / 300A peak phase current. 18-MOSFET design with IP67 waterproof housing. 150% flux weakening, ≥93% max efficiency, peak power ~8640W (72V × 120A boost). Supports FOC sinewave drive. Hall sensored. Programmable via PC with USB adapter cable. Designed for 2-3kW PMSM/BLDC motors — recommended for QS Motor pairings. Ships with function harness and USB programming cable. Product has been progressively upgraded over the years — older batches (2022-2023) were rated lower (Endless Sphere thread #125188 documents the firmware-level phase current bump from 9000 to 9960 units for 'Old EM-100' vs 'New EM-100'). Current production is 100A continuous / 120A boost / 300A phase peak. Superseded by the EM100 SP V5.0 CAN which adds self-learning and a slight phase-peak upgrade to 340A.
- Compatibility summary
- 228 components are compatible with the VOTOL EM100 CAN, including 220 batteries, 1 display, 4 throttles, 3 hub motors.
AMORGE 16S6P 25.2Ah 210A (Molicel P42A) for Valtinsu EM-5
AMORGE 14S7P 29.4Ah 245A (Molicel P42A) for Valtinsu EM-5
AMORGE 14S7P 31.5Ah 245A (Molicel P45B) for Valtinsu EM-5
AMORGE 20S5P 22.5Ah 175A (Molicel P45B) for Valtinsu EM-5
AMORGE 16S10P 50Ah 220A (Samsung 50S) for MX500/SX500/MX650
AMORGE 16S10P 50Ah 220A (Samsung 50S) for MX500/SX500/MX650
AMORGE 16S7P 31.5Ah 245A (Molicel P45B) for Valtinsu EM-5
AMORGE 20S8P 36Ah 280A (Molicel P45B) for Tuttio Soleil01
AMORGE 20S8P 40Ah 320A (Molicel P50B) for Tuttio Soleil01
AMORGE 20S7P 35Ah 280A (Molicel P50B) for Tuttio Soleil01
![Generic Full Twist Throttle [3-pin JST SM]](https://cdn.wattworks.bike/products/a8365e57-64fe-48ee-9b24-a8379b5e41e6/1772529107526_128.webp)
Frequently Asked Questions
Ready to build?
Start a new build with the VOTOL EM100 CAN and pick from 228 compatible components.