FLIPSKY FSESC 75450 84V (Water Cooling)
Options
Enclosure
Water CoolingNo Enclosure$280
14–84V (20S) very-high-current VESC-based single ESC — 450A continuous @ 50V (350A @ 75V), 1200A burst. Aluminum case with water-cooling enclosure (IP65) and an integrated red ignition power button. FOC + BLDC with regenerative braking, field weakening, and self-learning. For e-foil, surfboards, and extreme high-power e-motorcycles. Configure via USB with VESC Tool.
In brief: 14–84V controller. 450A continuous. 1200A peak. VESC, FOC, dual mode, regen, field weakening, self-learning support.
Specs verified Sep 10, 2026
Reviews
No reviews yet — be the first to share your experience.
Sign in with Google to leave a review.
Specifications
Type
- VESC Based
- Yes
- Cooling
- Liquid
Electrical
- Voltage Range
- 14–84V
- Continuous Amps
- 450A
- Peak Amps
- 1200A
Voltage-Dependent Current Ratings
- 50V
- 450A
- 75V
- 350A
Motor Features
- Regen Support
- Yes
- Drive Mode
- FOC
- Sensor Mode
- Dual Mode
- Field Weakening
- Yes
- Self-Learning
- Yes
- Dual Motor Support
- No
- Controller Pairing
- No
Inputs
- Throttle Support
- Yes
- PAS Support
- Yes
Display
- Supports Display
- Yes
- Requires Display
- No
- Protocols
- VESC
Power Switch
- Supports Power Switch
- Yes
- Requires Power Switch
- Yes
- Requires Pre-charge
- No
Programming
- Via Display
- No
- Via Phone
- No
- Via PC
- Yes
Physical
- Dimensions (L×W×H)
- 227.5mm × 140mm × 54mm
- IP Rating
- IP65
Ports & Connectors
Battery Input2 wires
Power
| Pin | Wire color | Function |
|---|---|---|
| 1 | Red | Battery + |
| 2 | Black | Battery - |
Motor Phases3 wires
Motor Phase
| Pin | Wire color | Function |
|---|---|---|
| 1 | Black | Phase A |
| 2 | Black | Phase B |
| 3 | Black | Phase C |
Motor Sensors/
TemperatureHall Sensor
| Pin | Wire color | Function |
|---|---|---|
| 1 | Red | 5V Power |
| 2 | White | Motor Temp |
| 3 | Blue | Hall A |
| 4 | Orange | Hall B |
| 5 | Green | Hall C |
| 6 | Black | Ground |
CAN+POWER/
CAN BusPower Switch
| Pin | Wire color | Function |
|---|---|---|
| 1 | Black | Ground |
| 2 | Gray | CAN Low |
| 3 | Yellow | CAN High |
| 4 | Red | 5V Power |
| 5 | Red | Slave Power On |
Power Switch/
Power Switch
| Pin | Wire color | Function |
|---|---|---|
| 1 | Black | Ground |
| 2 | Red | Power Switch Signal |
| 3 | Green | Battery + |
Servo/
PPM / Servo
| Pin | Wire color | Function |
|---|---|---|
| 1 | Black | Ground |
| 2 | Red | 5V Power |
| 3 | White | PPM Signal |
COMM/
COMMUART
| Pin | Wire color | Function |
|---|---|---|
| 1 | Red | 5V Power |
| 2 | Red | 3.3V Power |
| 3 | Black | Ground |
| 4 | Gray | ADC Channel 1 |
| 5 | Purple | UART RX |
| 6 | Orange | UART TX |
| 7 | Blue | ADC Channel 2 |
| 8 | Green | ADC Channel 3 |
USB
