Skip to main content

The MakerX Go-FOC K900 is a flagship high-power single VESC-based ESC rated up to 100V with 1000A continuous and 1200A peak phase current, driven by 30 high-efficiency MOSFETs on an aluminum substrate with a reinforced thick-copper PCB. Housed in a fully sealed waterproof enclosure roughly 50% smaller than comparable controllers. Built for high-performance EVs, industrial drives, and robotics; ships with a 16mm metal power switch and is configured via VESC Tool.

In brief: 12–100V controller. 500A peak. VESC, FOC, dual mode, regen support. From $595.

Where to Find

Prices tracked across 1 seller

Specifications

Type

VESC Based
Yes
Cooling
Air

Electrical

Voltage Range
12–100V
Peak Amps
500A
Max Phase Amps
1200A

Motor Features

Regen Support
Yes
Drive Mode
FOC
Sensor Mode
Dual Mode
Dual Motor Support
No
Controller Pairing
No

Inputs

Throttle Support
Yes
PAS Support
No

Display

Supports Display
No
Requires Display
No
Protocols
VESC

Power Switch

Supports Power Switch
Yes

Programming

Via PC
Yes

Ports & Connectors

Battery Input2-position Screw Terminal Block
Power
1Battery +
2Battery -
Motor Phases
Motor Phase
1Phase A
2Phase B
3Phase C
Hall Sensor
TemperatureHall Sensor
15V Power
2Motor Temp
3Hall A
4Hall B
5Hall C
6Ground
Power Switch
Power Switch
1Power Switch Signal
2Ground
Throttle / PPM
Throttle
1Ground
25V Power
3Throttle Signal
UART / Comm
UART
1Ground
25V Power
3UART RX
4UART TX
CAN Bus
CAN Bus
1Ground
25V Power
3CAN High
4CAN Low

Frequently Asked Questions

Alternative Controllers

Other Controllers

We use cookies for analytics and to support affiliate links. Privacy Policy