Skip to main content

14–110V (26S) VESC-based single ESC — 200A continuous @ 110V, 400A peak. FOC + BLDC with regenerative braking and self-learning. Integrated red power button and phase filter. Aluminum PCB, 8AWG wires. For high-voltage e-motorcycles, high-power e-scooters, surfboards, and combat robots. Configure via USB with VESC Tool.

In brief: 14–110V controller. 200A continuous. 400A peak. VESC, FOC, dual mode, regen, field weakening, self-learning support. From $165 across 2 sellers.

Where to Find

Prices tracked across 2 sellers

* Shipping estimates are for the contiguous US and may vary by location.

* This page contains affiliate links. WattWorks may earn a commission at no extra cost to you. Learn more

Specifications

Type

VESC Based
Yes
Cooling
Air

Electrical

Voltage Range
14–110V
Continuous Amps
200A
Peak Amps
400A

Motor Features

Regen Support
Yes
Drive Mode
FOC
Sensor Mode
Dual Mode
Field Weakening
Yes
Self-Learning
Yes
Dual Motor Support
No
Controller Pairing
No

Inputs

Throttle Support
Yes
PAS Support
Yes

Display

Supports Display
Yes
Requires Display
No
Protocols
VESC

Power Switch

Supports Power Switch
Yes
Requires Power Switch
Yes
Requires Pre-charge
No

Programming

Via Display
No
Via Phone
No
Via PC
Yes

Physical

Weight
680 g
Dimensions (L×W×H)
144.7mm × 72.8mm × 40.6mm

Ports & Connectors

Battery Input2 wires
Power
1Battery +
2Battery -
Motor Phases3 wires
Motor Phase
1Phase A
2Phase B
3Phase C
Motor Sensors/
TemperatureHall Sensor
15V Power
2Motor Temp
3Hall A
4Hall B
5Hall C
6Ground
CAN+POWER/
CAN BusPower Switch
1Ground
2CAN Low
3CAN High
45V Power
5Slave Power On
Power Switch/
Power Switch
1Ground
2Power Switch Signal
3Battery +
Servo/
PPM / Servo
1Ground
25V Power
3PPM Signal
COMM/
COMMUART
15V Power
23.3V Power
3Ground
4ADC Channel 1
5UART RX
6UART TX
7ADC Channel 2
8ADC Channel 3
USB

Frequently Asked Questions

Alternative Controllers

Other Controllers

We use cookies for analytics and to support affiliate links. Privacy Policy