MakerX HI100
The MakerX Go-FOC HI100 is a single VESC-based ESC built on VESC100250 hardware, rated 12-75V (4-16s) with 30A continuous / 80A peak battery current and up to 120A peak phase current. Runs MakerX custom firmware, ships with a cooling box, and is configured via VESC Tool. No built-in power switch.
In brief: 12–75V controller. 30A continuous. 80A peak. VESC, FOC, dual mode, regen support. From $135.
Specs verified Jul 9, 2026
Where to Find
Prices tracked across 1 sellerPrice History
Price History
Price changes tracked by the crawler
Current best price $135.00. Over the past 90 days: low $135.00, high $135.00, average $135.00 — about average.
- MakerX
All Records
5 price records in this period
| Date | Price | Shipping | Total | Change | Coupon | Rating | Sales | In Stock | Status |
|---|---|---|---|---|---|---|---|---|---|
MakerX(5 records) | |||||||||
| Jul 9, 202609:00 PM | $135.00 | — | $135.00 | $0.00 | — | — | — | Yes | active |
| Jun 30, 202612:29 PM | $135.00 | — | $135.00 | $0.00 | — | — | — | Yes | active |
| Jun 21, 202601:00 PM | $135.00 | — | $135.00 | $0.00 | — | — | — | Yes | active |
| Jun 13, 202605:24 PM | $135.00 | — | $135.00 | $0.00 | — | — | — | Yes | active |
| Jun 12, 202612:48 PM | $135.00 | — | $135.00 | Initial | — | — | — | Yes | active |
Reviews
No reviews yet — be the first to share your experience.
Sign in with Google to leave a review.
Specifications
Type
- VESC Based
- Yes
- Cooling
- Air
Electrical
- Voltage Range
- 12–75V
- Continuous Amps
- 30A
- Peak Amps
- 80A
- Max Phase Amps
- 120A
Motor Features
- Regen Support
- Yes
- Drive Mode
- FOC
- Sensor Mode
- Dual Mode
- Dual Motor Support
- No
- Controller Pairing
- No
Inputs
- Throttle Support
- Yes
- PAS Support
- No
Display
- Supports Display
- No
- Requires Display
- No
- Protocols
- VESC
Power Switch
- Supports Power Switch
- No
Programming
- Via PC
- Yes
Physical
- Weight
- 288 g
- Dimensions (L×W×H)
- 77.5mm × 77.5mm × 19.5mm
Ports & Connectors
Motor Phases3 wires
Motor Phase
| Pin | Wire color | Function |
|---|---|---|
| 1 | Black | Phase A |
| 2 | Black | Phase B |
| 3 | Black | Phase C |
Hall Sensor
TemperatureHall Sensor
| Pin | Wire color | Function |
|---|---|---|
| 1 | Red | 5V Power |
| 2 | White | Motor Temp |
| 3 | Blue | Hall A |
| 4 | Green | Hall B |
| 5 | Yellow | Hall C |
| 6 | Black | Ground |
Throttle / PPM
Throttle
| Pin | Wire color | Function |
|---|---|---|
| 1 | Black | Ground |
| 2 | Red | 5V Power |
| 3 | White | Throttle Signal |
UART / Comm
UART
| Pin | Wire color | Function |
|---|---|---|
| 1 | Black | Ground |
| 2 | Red | 5V Power |
| 3 | Gray | UART RX |
| 4 | White | UART TX |
CAN Bus
CAN Bus
| Pin | Wire color | Function |
|---|---|---|
| 1 | Black | Ground |
| 2 | Red | 5V Power |
| 3 | Yellow | CAN High |
| 4 | Green | CAN Low |
Battery Input/
