MakerX Go-FOC G300
The MakerX Go-FOC G300 is a high-power single VESC-based ESC (built on VESC100250) rated up to 100V with 300A continuous and 500A peak phase current. Features an all-aluminum alloy shell with 18 waterproof rubber seals for full-body splash protection, high-current copper terminals, and a 16mm metal power-switch button. Designed for electric surfboards, go-karts, motorcycles, boats, and combat/joint robots. Configured via VESC Tool.
In brief: 12–100V controller. 250A continuous. 400A peak. VESC, FOC, dual mode, regen support. From $345.
Where to Find
Prices tracked across 1 sellerSpecifications
Type
- VESC Based
- Yes
- Cooling
- Air
Electrical
- Voltage Range
- 12–100V
- Continuous Amps
- 250A
- Peak Amps
- 400A
- Max Phase Amps
- 500A
Motor Features
- Regen Support
- Yes
- Drive Mode
- FOC
- Sensor Mode
- Dual Mode
- Dual Motor Support
- No
- Controller Pairing
- No
Inputs
- Throttle Support
- Yes
- PAS Support
- No
Display
- Supports Display
- No
- Requires Display
- No
- Protocols
- VESC
Power Switch
- Supports Power Switch
- Yes
Programming
- Via PC
- Yes
Physical
- Dimensions (L×W×H)
- 124mm × 79mm × 38.5mm
Ports & Connectors
Battery Input2-position Screw Terminal Block
Power
1Battery +
2Battery -
Motor Phases3-position Screw Terminal Block
Motor Phase
1Phase A
2Phase B
3Phase C
Hall Sensor
TemperatureHall Sensor
15V Power
2Motor Temp
3Hall A
4Hall B
5Hall C
6Ground
Power Switch
Power Switch
1Power Switch Signal
2Ground
Throttle / PPM
Throttle
1Ground
25V Power
3Throttle Signal
UART / Comm
UART
1Ground
25V Power
3UART RX
4UART TX
CAN Bus
CAN Bus
1Ground
25V Power
3CAN High
4CAN Low
