MakerX Go-FOC 2G300
The MakerX Go-FOC 2G300 is a high-power dual VESC-based ESC formed by splicing two G300 boards, rated 12-96V (4-21s) with up to 250A max battery current and 500A peak phase current per side, for ~50kW peak total. Built on VESC100250 hardware with internally bridged CAN and battery rails for dual-motor drive (electric skateboards, go-karts). Features phase filtering and a built-in power switch; configured via VESC Tool.
In brief: 12–96V controller. 250A continuous. 400A peak. VESC, FOC, dual mode, regen support.
Where to Find
Prices tracked across 1 sellerSpecifications
Type
- VESC Based
- Yes
- Cooling
- Air
Electrical
- Voltage Range
- 12–96V
- Continuous Amps
- 250A
- Peak Amps
- 400A
- Max Phase Amps
- 500A
Motor Features
- Regen Support
- Yes
- Drive Mode
- FOC
- Sensor Mode
- Dual Mode
- Dual Motor Support
- Yes
- Controller Pairing
- No
Inputs
- Throttle Support
- Yes
- PAS Support
- No
Display
- Supports Display
- No
- Requires Display
- No
- Protocols
- VESC
Power Switch
- Supports Power Switch
- Yes
Programming
- Via PC
- Yes
Physical
- Weight
- 1.07 kg
- Dimensions (L×W×H)
- 137.5mm × 112mm × 35.5mm
Ports & Connectors
Battery Input2-position Screw Terminal Block
Power
1Battery +
2Battery -
Motor Phases3-position Screw Terminal Block
Motor Phase
1Phase A
2Phase B
3Phase C
Motor Phases (Side B)3-position Screw Terminal Block
Motor Phase
1Phase A
2Phase B
3Phase C
Hall Sensor
TemperatureHall Sensor
15V Power
2Motor Temp
3Hall A
4Hall B
5Hall C
6Ground
Hall Sensor (Side B)
TemperatureHall Sensor
15V Power
2Motor Temp
3Hall A
4Hall B
5Hall C
6Ground
Power Switch
Power Switch
1Power Switch Signal
2Ground
Throttle / PPM
Throttle
1Ground
25V Power
3Throttle Signal
UART / Comm
UART
1Ground
25V Power
3UART RX
4UART TX
CAN Bus
CAN Bus
1Ground
25V Power
3CAN High
4CAN Low
