VOTOL EM100GTS (72360S, LIN/CAN)
VOTOL EM100GTS is a 2025 high-boost variant of the EM100 family — 60-84V sinewave controller with ~100A rated DC / 200A boost / 360A peak phase, suited for 2-4kW PMSM/BLDC motors. Slightly wider voltage range than base EM100 (up to 84V) for higher-voltage builds. Features flux weakening, IP67 waterproofing, LIN/CAN communication. Uses VOTOL's standard EM/SV-series Wiring A architecture: 3 flush Mini-Fit Jr headers + screw terminals. Programmable via PC. 1.1kg, 172×105×56mm.
In brief: 60–84V controller. 100A continuous. 200A peak. Sinewave, sensored, regen, field weakening support. From $185 across 2 sellers.
Type
- VESC Based
- No
Electrical
- Voltage Range
- 60–84V
- Continuous Amps
- 100A
- Peak Amps
- 200A
- Max Phase Amps
- 360A
Motor Features
- Regen Support
- Yes
- Drive Mode
- Sinewave
- Sensor Mode
- Sensored
- Field Weakening
- Yes
- Self-Learning
- No
- Dual Motor Support
- No
- Controller Pairing
- No
Inputs
- Throttle Support
- Yes
- PAS Support
- No
Display
- Supports Display
- Yes
- Requires Display
- No
- Protocols
- SiAECOSYS ONE-LIN, SiAECOSYS CAN BUS
Power Switch
- Supports Power Switch
- Yes
- Requires Power Switch
- No
- Requires Pre-charge
- No
Programming
- Via Display
- No
- Via Phone
- No
- Via PC
- Yes
Physical
- Weight
- 1.1kg
- Dimensions (L×W×H)
- 172.0mm × 105.0mm × 56.0mm
- IP Rating
- IP67
Ports & Connectors
Included Components
Where to Find
Prices tracked across 2 sellersAliExpress - DKYS Store
$184.64
AliExpress - OBDII Diag Factory Store
$254.83
* Some seller links on this page are affiliate links. If you purchase through them, WattWorks may earn a small commission at no extra cost to you. Affiliate status does not influence which products appear, how they are ranked, or the prices shown. Learn more here
