VOTOL EM100-4P CAN
VOTOL EM100-4P sine wave controller with CAN BUS display protocol. 'New Version' hardware revision of the EM100 family (successor to the older EM100P). 48-72V, 100A continuous DC / 120A boost DC / 300A peak phase current. IP65 waterproof. 150% flux weakening, supports FOC sinewave drive. Hall sensored. Programmable via PC with USB adapter cable. Designed for 2-3kW PMSM/BLDC motors. Ships with function harness and USB programming cable (New Version CAN-enabled USB cable, shared with EM50-4P, EM80GTSP, EM150-2SP, EM200-2P, EM260P).
In brief: 48–72V controller. 100A continuous. 120A peak. FOC, sensored, regen, field weakening support. From $200.
Type
- VESC Based
- No
Electrical
- Voltage Range
- 48–72V
- Continuous Amps
- 100A
- Peak Amps
- 120A
- Max Phase Amps
- 300A
Motor Features
- Regen Support
- Yes
- Drive Mode
- FOC
- Sensor Mode
- Sensored
- Field Weakening
- Yes
- Self-Learning
- No
- Dual Motor Support
- No
- Controller Pairing
- No
Inputs
- Throttle Support
- Yes
- PAS Support
- No
Display
- Supports Display
- Yes
- Requires Display
- No
- Protocols
- SiAECOSYS CAN BUS
Power Switch
- Supports Power Switch
- Yes
- Requires Power Switch
- No
- Requires Pre-charge
- No
Programming
- Via Display
- No
- Via Phone
- No
- Via PC
- Yes
Physical
- Weight
- 1.65kg
- Dimensions (L×W×H)
- 221.0mm × 127.0mm × 62.0mm
- IP Rating
- IP65
Ports & Connectors
Power Input2-position Screw Terminal Block
Power
1Battery +
2Battery -
Phase Wires3-position Screw Terminal Block
Motor Phase
1Phase A
2Phase B
3Phase C
Hall Sensor/
Hall Sensor
15V Power
2None
3Ground
4Hall A
5Hall B
6Hall C
Alarm / Anti-theft Harness (2×4)
Function Harness (2×8)
