VOTOL EM150-2sp
VOTOL EM150-2sp is the New-Version 72V FOC sinewave controller with 150A rated current, 200A boost, and 390A peak phase current (≤14400W max power). Features 150% flux weakening, IP67 rating, and ≥92% max efficiency. Uses a single large AMP connector on the housing — harness is universal with EM200-2 and EM260 controllers per VOTOL documentation. Dual-protocol: supports both SIAECOSYS LIN and CAN displays.
In brief: 60–84V controller. 150A continuous. 390A peak. FOC, dual mode, regen, field weakening, self-learning support. From $239 across 2 sellers.
Type
- VESC Based
- No
Electrical
- Voltage Range
- 60–84V
- Continuous Amps
- 150A
- Peak Amps
- 390A
Motor Features
- Regen Support
- Yes
- Drive Mode
- FOC
- Sensor Mode
- Dual Mode
- Field Weakening
- Yes
- Self-Learning
- Yes
- Dual Motor Support
- No
- Controller Pairing
- No
Inputs
- Throttle Support
- Yes
- PAS Support
- No
Display
- Supports Display
- Yes
- Requires Display
- No
- Protocols
- SiAECOSYS ONE-LIN, SiAECOSYS CAN BUS
Power Switch
- Supports Power Switch
- Yes
- Requires Power Switch
- Yes
- Requires Pre-charge
- No
Programming
- Via Display
- No
- Via Phone
- With External Module
- Via PC
- Yes
Physical
- Weight
- 2.03kg
- IP Rating
- IP67
Ports & Connectors
Power Input2-position Screw Terminal Block
Power
1Battery +
2Battery -
Phase Wires3-position Screw Terminal Block
Motor Phase
1Phase A
2Phase B
3Phase C
Main Signal Connector (Ampseal 23-pin)
