VOTOL EM150 SP (CAN)
VOTOL EM150 SP is a 72V FOC sinewave controller with 150A rated battery current and 380A peak phase current (≤14400W rated power). Features 200% flux weakening, IP67 rating, and ~92% max efficiency. CAN variant uses SIAECOSYS CAN BUS protocol for display/BMS communication. Uses the Old-Version EM/SV-series connector architecture: 3 Molex headers (function 2×8, alarm 2×4, hall 2×3) + screw terminals for power/phase.
In brief: 60–84V controller. 150A continuous. 380A peak. FOC, dual mode, regen, field weakening, self-learning support. From $197 across 2 sellers.
Type
- VESC Based
- No
Electrical
- Voltage Range
- 60–84V
- Continuous Amps
- 150A
- Peak Amps
- 380A
Motor Features
- Regen Support
- Yes
- Drive Mode
- FOC
- Sensor Mode
- Dual Mode
- Field Weakening
- Yes
- Self-Learning
- Yes
- Dual Motor Support
- No
- Controller Pairing
- No
Inputs
- Throttle Support
- Yes
- PAS Support
- No
Display
- Supports Display
- Yes
- Requires Display
- No
- Protocols
- SiAECOSYS CAN BUS
Power Switch
- Supports Power Switch
- Yes
- Requires Power Switch
- Yes
- Requires Pre-charge
- No
Programming
- Via Display
- No
- Via Phone
- With External Module
- Via PC
- Yes
Physical
- Weight
- 2kg
- IP Rating
- IP67
Ports & Connectors
Power Input2-position Screw Terminal Block
Power
1Battery +
2Battery -
Phase Wires3-position Screw Terminal Block
Motor Phase
1Phase A
2Phase B
3Phase C
Hall Sensor/
Hall Sensor
15V Power
2None
3Ground
4Hall A
5Hall B
6Hall C
Alarm / Anti-theft Harness (2×4)
Function Harness (2×8)
