VOTOL EM200-2sp
VOTOL EM200-2sp sine wave controller (updated generation). 72V nominal, 200A continuous DC / 250A boost DC / 600A peak phase current. Max power 18000W, 200% flux weakening, ≥92% max efficiency, IP67 waterproof, 2.44kg. Supports FOC sinewave drive, dual-protocol (LIN and CAN BUS selectable via software). Hall sensored with regenerative braking. Programmable via PC with USB adapter cable. Designed for 4-8kW PMSM/BLDC motors — commonly paired with QS 138 V3 IPM, QS 205 (5kW), and similar high-power hub/mid-drive motors in e-moto / Sur-Ron-class builds. Updated design vs base EM200: single AMP connector replaces dual Molex (more reliable wiring), smaller size, better heat dissipation, improved waterproofing, and shared function-harness compatibility with EM150-2 and EM260 controllers (one harness fits all three). Dimensions: 249×138mm (with mounting tabs) / 234×123mm body / 74mm tall / 63mm body height. Ships with function harness and USB programming cable.
In brief: 48–72V controller. 200A continuous. 250A peak. FOC, sensored, regen, field weakening support. From $149 across 2 sellers.
Type
- VESC Based
- No
Electrical
- Voltage Range
- 48–72V
- Continuous Amps
- 200A
- Peak Amps
- 250A
- Max Phase Amps
- 600A
Motor Features
- Regen Support
- Yes
- Drive Mode
- FOC
- Sensor Mode
- Sensored
- Field Weakening
- Yes
- Self-Learning
- No
- Dual Motor Support
- No
- Controller Pairing
- No
Inputs
- Throttle Support
- Yes
- PAS Support
- No
Display
- Supports Display
- Yes
- Requires Display
- No
- Protocols
- SiAECOSYS ONE-LIN, SiAECOSYS CAN BUS
Power Switch
- Supports Power Switch
- Yes
- Requires Power Switch
- No
- Requires Pre-charge
- Yes
Programming
- Via Display
- No
- Via Phone
- No
- Via PC
- Yes
Physical
- Weight
- 2.44kg
- Dimensions (L×W×H)
- 249.0mm × 138.0mm × 74.0mm
- IP Rating
- IP67
