VOTOL EM200 SP
VOTOL EM200 SP sine wave controller (older/Old Version generation — VOTOL's internal name: 'EM200P'). 72V nominal, 200A continuous DC / 245A boost DC / 550A peak phase current. Max power 17640W, 300% flux weakening, ≥92% max efficiency, IP67 waterproof, 2.86kg. Supports FOC sinewave drive. Hall sensored with regenerative braking. Programmable via PC with USB adapter cable (Old Version cable, shared with EM50P, EM100P, EM150SP). Designed for 4-8kW PMSM/BLDC motors — commonly paired with QS 205 (5kW), QS 138 V3, and similar high-power hub/mid-drive motors in e-moto / Sur-Ron-class builds. Ships with function harness and USB programming cable. Older dual-Molex-connector design. Superseded by the EM200-2sp (VOTOL's 'EM200-2P') which uses a newer single-AMP-connector architecture with improved heat dissipation and waterproofing — older EM200 SP units still widely available at similar price point. Dimensions: 285×168mm (overall with mounting tabs) / 258×154mm (body) / 69mm tall.
In brief: 48–72V controller. 200A continuous. 245A peak. FOC, sensored, regen, field weakening support. From $320.
Type
- VESC Based
- No
Electrical
- Voltage Range
- 48–72V
- Continuous Amps
- 200A
- Peak Amps
- 245A
- Max Phase Amps
- 550A
Motor Features
- Regen Support
- Yes
- Drive Mode
- FOC
- Sensor Mode
- Sensored
- Field Weakening
- Yes
- Self-Learning
- No
- Dual Motor Support
- No
- Controller Pairing
- No
Inputs
- Throttle Support
- Yes
- PAS Support
- No
Display
- Supports Display
- Yes
- Requires Display
- No
- Protocols
- SiAECOSYS ONE-LIN, SiAECOSYS CAN BUS
Power Switch
- Supports Power Switch
- Yes
- Requires Power Switch
- No
- Requires Pre-charge
- Yes
Programming
- Via Display
- No
- Via Phone
- No
- Via PC
- Yes
Physical
- Weight
- 2.86kg
- Dimensions (L×W×H)
- 285.0mm × 168.0mm × 69.0mm
- IP Rating
- IP67
