VOTOL EM260 SGTP 72V
VOTOL EM260 SGTP 72V is a high-power 72V FOC sinewave controller with 250A rated battery current and 600A peak phase current, suited for 4-10kW PMSM/BLDC motors (QS138 / QS205-class hub and mid-drive motors). Top speed ~160 kph on matched builds. Features flux weakening, IP67 waterproofing, CAN BUS communication, and programmable parameters via PC. Uses the VOTOL "New Version" connector architecture: a single TE Ampseal 23-pin signal connector carries all signals except battery and phase wires, which use dedicated screw terminals. Dual-protocol: supports both SIAECOSYS LIN and CAN displays.
In brief: 60–84V controller. 250A continuous. 600A peak. Sinewave, dual mode, regen, field weakening, self-learning support. From $394 across 2 sellers.
Type
- VESC Based
- No
Electrical
- Voltage Range
- 60–84V
- Continuous Amps
- 250A
- Peak Amps
- 600A
Motor Features
- Regen Support
- Yes
- Drive Mode
- Sinewave
- Sensor Mode
- Dual Mode
- Field Weakening
- Yes
- Self-Learning
- Yes
- Dual Motor Support
- No
- Controller Pairing
- No
Inputs
- Throttle Support
- Yes
- PAS Support
- No
Display
- Supports Display
- Yes
- Requires Display
- No
- Protocols
- SiAECOSYS ONE-LIN, SiAECOSYS CAN BUS
Power Switch
- Supports Power Switch
- Yes
- Requires Power Switch
- Yes
- Requires Pre-charge
- Yes
Programming
- Via Display
- No
- Via Phone
- With External Module
- Via PC
- Yes
Physical
- Weight
- 2.8kg
- IP Rating
- IP67
Ports & Connectors
Power Input2-position Screw Terminal Block
Power
1Battery +
2Battery -
Phase Wires3-position Screw Terminal Block
Motor Phase
1Phase A
2Phase B
3Phase C
Main Signal Connector (Ampseal 23-pin)
E-lock
Power Switch
1Battery +
2Power Switch Signal
LIN1 wire
Display
1One-Wire Comm
Mode (1,2,3)
Display
1Gear Low
2Gear Medium
3Gear High
R mode
Display
1Gear Reverse
2Ground
S mode
Display
1Gear Sport
Throttle
Throttle
15V Power
2Ground
3Throttle Signal
High Brake
Brake
1Brake Signal
P mode
Brake
1Parking / E-Brake
Program Debugging
UART
1Ground
25V Power
3UART TX
4UART RX
