VOTOL EM80 GTSP (LIN)
VOTOL EM80 GTSP sine wave controller with ONE-LIN (YXT) display protocol. 48V-72V, 60A continuous / 100A boost battery current, 230A peak phase current. 18-MOSFET design with IP65 waterproofing at just 0.9kg. Supports FOC sinewave drive with 150% flux weakening for extended speed range. Hall sensored with regenerative braking. Programmable via PC with USB adapter cable. Designed for 3-4kW PMSM/BLDC motors — recommended for QS Motor QS90/QS120. Ships with two firmware options: hub motor or mid-drive configuration (same hardware). Includes function harness and USB programming cable.
In brief: 48–72V controller. 60A continuous. 100A peak. Sinewave, dual mode, regen, field weakening support.
Type
- VESC Based
- No
Electrical
- Voltage Range
- 48–72V
- Continuous Amps
- 60A
- Peak Amps
- 100A
- Max Phase Amps
- 230A
Motor Features
- Regen Support
- Yes
- Drive Mode
- Sinewave
- Sensor Mode
- Dual Mode
- Field Weakening
- Yes
- Self-Learning
- No
- Dual Motor Support
- No
- Controller Pairing
- No
Inputs
- Throttle Support
- Yes
- PAS Support
- No
Display
- Supports Display
- Yes
- Requires Display
- No
- Protocols
- SiAECOSYS ONE-LIN
Power Switch
- Supports Power Switch
- Yes
- Requires Power Switch
- No
- Requires Pre-charge
- No
Programming
- Via Display
- No
- Via Phone
- No
- Via PC
- Yes
Physical
- Weight
- 900 g
- Dimensions (L×W×H)
- 180.0mm × 96.0mm × 56.0mm
- IP Rating
- IP65
Ports & Connectors
Included Components
Where to Find
Prices tracked across 2 sellers* Shipping estimates are for the contiguous US and may vary by location.
